Results 1 to 2 of 2

Thread: new processor

  1. #1
    Member
    Join Date
    Jul 2001
    Location
    manorville
    Posts
    46

    new processor

    i have a abit kt7 raid board
    my friend just bought me a new processor
    amd athlon 1gig at 266
    will this processor work with my board?
    I thought this board will only support 200

    Also the reason I ask is i installed the processor and it will not
    recognize it as 1gig
    i changed the multiplier and it defaults to 7.5
    it will not accept the 10x 100

    thanks

    p.s. I did reset cmos
    Last edited by manor631; 10-09-2001 at 09:42 AM.

  2. #2
    Senior Member jokostel's Avatar
    Join Date
    Feb 1999
    Location
    Bismarck,ND,58503
    Posts
    987
    IT WILL run on that board but not at 266fsb(133x2)
    since you are running the KT133 not the KT133A chipset.
    you are right.
    m you would have to unlock the l1 bridges to get full potential out of the cpu... here is a diag of what it should look like...


    : : | | lets say this is l1 right now ok.... i know its not what it really looks like but this gives you the idea....
    THIS IS LOCKED... meaning you cannot change the Multiplyer ONLY FSB.


    this however is unlocked. | | | | all four are connected like this...
    NOW you can change the multiplyer...


    what do i use you may ask

    a magnifiying glass
    a .05 mm retract pencil or if your a very brave man try a conductive pen
    the pencil will come off with eraser if you goof up the conductive pen its new processor time.....




    hope thise long message helps ya dude


    peace out,

    jokostel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •