-
One of two identical mice-Hama 00086543(maybe SN) blue maybe be the candidate
I charged batteries ( 2x AA) and no problems yesterday.
Then i bought new ones nonrechearchables. and switched to thes(Blue version of that mouse) and i saw the grey roundshaped sign which contained the second mouse-pointer glued to lower right side.
immediately changed back to yellow mouse. so far so good.
Yes also ran Glary Utilities. removed also last file of mouse driver Rapoo-mouse. it had blocked core isolation which i had to activate in registry. couldnt delete in registry.
next is getting shielded lan-cable 2. had 3m but its defective-loose contact on lan-adapter.
screen-switch will then also reattached. to use second ultrabook
-
i could use the same driver when i just switched to defective mouse. they are identical.
-
Working Touchscreen on defective screen making window-interferences.
didnt find switch or cable to deactivate screen.
Mouse-receiver now on right side. will now remove other deactivated mice-entries.
-
Always getting better-Solved the gordic knot?
Have now deleted all disabled nonworking mouse entries. had to show everything.
Since both mice are identical i switched. working both.
Next is new mouse.
-
it seems blueblack mouse is defective. yellow-blue ok.
have remove all non-needed driver-settings in device-manager.
-
still have the problem. hope new logitec-mouse will help.
I am surfing for many hours and unexpectedly glueing reappears.
-
Which devices at which ports? usb 2.0. 3.0 and 3.1 gen1 thunderbolt)
I still have the mouse-glueing problem which occurs earlier or later at a session.
I will replace lan-cable getting new shielded one.
Lan-adapter
Mouse
Have USB 2.0 external keyboard on receiver there
USB 3.0: usb 2.0 mouse
USB 3.1/1 thunderbolt: 4x hub. fan,LAN, the drives.
when mouse getting crazy.
1. shutdown,
2. shutdown mouse and switching receiver to other usb- port.
3. deleting obsolete mouse-entries in deveice-manager
-
Update:
1. Changed
New R45-Lan-usb-adapter. cable now stable. changed port(4 in total on router)-Didnt help maybe too long. new will be 2m instead of 3.
2. Switched to
a) old cable mouse deleting all device-manager entries.
b) Wlan
low battery currency definitively a reason for the troubles.
Second Mouse pointer is switching from right to left side sometimes.
worst is when windows are minimized and irfanview is getting crazy. yes i removed with no result.
Next is getting 2m shielded lan-cable and new mouse with built-in battery.
Problems are starting after many hours. mouse-navigating then maybe be next to impossible.
restart needed.
often removing device-manager-mouse-entries help.
-
SOLVED FINALLY! Glitch in windows 10 laptops. tablet-mode-touchscreen
Unbelievable but true after trying everything and nothing helped i googled again and really found THE solution:
https://www.youtube.com/watch?v=i61ubm-Ohqw&t=17s
touchscreen on ultrabook i already deactivated but not in devicemanager.
its on windows 10 laptops here acer swift 5 old version i7 16/1tb
will then check also on my acer spin 1-111-
external screen and keyboard on swift 5 here.
have now my old cable-mouse attached. will not implement again rapoo-mouse since its driver is blocking core protection
-
disabled touchpad but in reality its still working. maybe signal doesnt get through since remaiing keyboard-functions are dead. if the secondary mouse-pointer stays away one cannot complain anything.
have a lot of entries there in human devices since i switched the plugs all the time.
i also deactivated synapsis touchpad driver. maybe i must restart.
-
How about adding SOLVED to the entry-title?
Maybe someone of the Admins can add SOLVED to the first title. or is there a solved button?
Have now a powered 7 Hub station tplink UH700. Both mouse and external keyboard(must use it since internal one is dead)-receivers are now docked directly on ultrabook.
-
SORRY: ITS THE WRONG LINK!!!
Originally Posted by europanorama
Unbelievable but true after trying everything and nothing helped i googled again and really found THE solution:
https://www.youtube.com/watch?v=i61ubm-Ohqw&t=17s
touchscreen on ultrabook i already deactivated but not in devicemanager.
its on windows 10 laptops here acer swift 5 old version i7 16/1tb
will then check also on my acer spin 1-111-
external screen and keyboard on swift 5 here.
have now my old cable-mouse attached. will not implement again rapoo-mouse since its driver is blocking core protection
Very sorry. Just have the problem again since MS seem to have "repaired" the solved problem to the bad. Grrrrrrr
And this link is maybe my mistake or it had been exchanged.
pity i cant find the original link in my files. BUT I WILL FIND IT.
In the right instruction a deep registry change had been made.
-
here a german explenation:
https://www.youtube.com/watch?v=BgtjBFSI-mE
Its easy. Logitech Wireless Remote Keyboard-receiver attached to USB-cable. to get usb 2. if on blue USB 3 slot.
2nd: installing unifiying software by logitech.
It seems MS has removed the first tip which i mentioned since it could have led to difficulties.
-
another sorry. I HAVE a DUAL-Monitor-Setup since integrated screen in Acer Ultrabook Swift 5 is dead after a light fall from 40cm to wooden base. heavier 1.25kg Spin 1-111 had 4 FALLS from double height onto the same naked wooden base(parkett). only hinge on one side was broken(plastic parts) and no more fully 360-rotation.
1. found trigger to reduce brightness(heat) of half-dead screen-no image-.
2. will now check out tip on that video.
and i will find the old trick.
-
i fear deleting wrong device manager entries- a lot of double/multipled. maybe resetting cured that. see other thread about sound gone after windows-update windows 10 home 64.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|