Results 1 to 6 of 6

Thread: Ultimate Boot CD 5 Guide

  1. #1
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    Ultimate Boot CD 5 Guide

    This is a quick how-to guide for creating an Ultimate Boot CD 5 (UBCD5) boot disc.

    Make sure that you have enough free disk space to download the UBCD5 .iso (≈600MB)

    Go to http://ubcd.sourceforge.net/download.html
    *Do NOT click on any buttons that say Download or Download Free Now!*
    (You won't see these if you are running an adblocker)

    Scroll down to the "Mirror Sites" section
    Click on one of the download buttons Attachment 13587next to ISO
    Save the ubcd5##.iso file to your computer

    After the download completes, you'll need to burn the ubcd5##.iso to a CD as an IMAGE:
    If you have Windows 7 or higher, follow these instructions:
    How To Burn an ISO Image In Windows 7

    If you don't see the "Burn disc image" option, it’s probably because .iso is associated with another program.
    Fix: “Burn Disc Image” Option Missing From Context Menu

    Otherwise, you can download ISORecorder and follow the instructions here:
    How can I write (burn) ISO files to CD or DVD?

    Post #2 - How to create a bootable flash drive
    Post #3 - Memory Test
    Post #4 - Hard Drive Test
    Post #5 - Remove MBR from USB flash drive using DiskPart (make non-bootable)
    Post #6 - How to Copy Files with Parted Magic
    Last edited by Midknyte; 04-05-2019 at 05:34 PM.

  2. #2
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    Bootable UBCD5 Flash Drive

    If your computer supports USB boot, you could create a bootable UBCD5 flash drive instead.
    The flash drive must be reformatted, so make sure to move any important data off to another location.

    *** WARNING! Rufus will destroy ALL data on the flash drive! ***

    To create a bootable UBCD5 flash drive:

    Download Rufus here: http://rufus.akeo.ie/

    Run rufus-###.exe

    Use the following parameters:
    Drive Properties:
    Device = verify that the correct flash drive is selected
    Boot selection = Disk or ISO image
    Click Select
    Browse to your ubcd5.iso file, and click Open
    Partition scheme = MBR
    Target system = BIOS (or UEFI-CSM)

    Format Options:
    Volume label = You can keep the current label or rename the drive
    File system = FAT32
    Cluster size = 16 kilobytes (Default)

    Click the Start button
    *** WARNING #2! Rufus will destroy ALL data on the flash drive! ***
    Click OK
    *Rufus will now write UBCD5 to your flash drive*
    Click Close

  3. #3
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    Memory Test

    To run a memory test:

    Boot from UBCD5 (CD or USB flash drive)
    Using the arrow keys, scroll down to "Memory" and press Enter
    Using the arrow keys, scroll down to "Memtest86+ V5.01" and press Enter
    Allow Memtest86+ to run though at least 1 full pass (2 or 3 passes would be preferred)
    You should see ZERO errors
    If there are errors, shut down the computer, remove all but 1 memory module, and run Memtest86+ again.
    Repeat for each memory module to determine which one(s) are defective.

  4. #4
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    Hard Drive Test

    To run a hard drive test:

    Determine your hard drive's manufacturer:
    - In Windows, look in Device Manager - Disk Drives
    - In the BIOS, look for IDE or SATA drives (varies by motherboard)
    - Open up the computer case and look at the sticker on the drive

    Seagate drive model numbers start with "ST"
    Western Digital drive model numbers start with "WD"
    If the model number does not start with "ST" or "WD", post it to the forum

    Boot from UBCD5 (CD or USB flash drive)
    Using the arrow keys, scroll down to "HDD" and press Enter
    Using the arrow keys, scroll down to "Diagnosis" and press Enter

    For Seagate drives, use the arrow keys to scroll down to "Seatools for DOS V2.23" and press Enter
    For Western Digital drives, use the arrow keys to scroll down to "Data Lifeguard Diagnostic for DOS V5.22" and press Enter

    Run the short/quick test first.
    If the short/quick test fails, replace the hard drive.
    If the short/quick test passes, run the long/extended test.
    If the long/extended test fails, replace the hard drive.


    *If the hard drive is not detected by Seatools or DLG Diags, it could be because the storage controller is set to AHCI mode in the BIOS.
    To resolve this, boot into the BIOS and set the storage controller mode to IDE or SATA. (varies by motherboard)
    Boot from UBCD5 again and run the hard drive diagnostics.
    After you finish running the diagnostics, boot into the BIOS again and set the storage controller mode back to AHCI.

  5. #5
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    Remove MBR from USB flash drive using DiskPart

    Remove MBR from USB flash drive using Windows

    If you have a USB flash drive that was previously set up as bootable, but you want to make it non-bootable again:

    *** Disconnect all USB drives except for the flash drive you are modifying ***
    *** Backup your flash drive data first! ***

    Open an Elevated command prompt
    Type diskpart
    Type list disk
    Determine which Disk # is your flash drive (Ex. Disk 1)

    Type select disk # (where # is the disk number of your flash drive)
    Type list partition
    Determine which Partition # is the boot partition (Usually the bigger one, Ex. Partition 0)

    Type select partition # (where # is the partition number of your flash drive)
    Type inactive

    You should see "DiskPart marked the current partition as inactive"

    Type exit to close DiskPart
    Type exit to close the command prompt

  6. #6
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,270

    How to Copy Files with Parted Magic

    * IMPORTANT! Plug in your destination USB HDD or flash drive BEFORE booting UBCD5 *
    * If you plugged in your destination drive after boot, see the "Mounting Drives" section below *

    Boot from the UBCD5 disc or flash drive
    Use the arrow keys to choose "Parted Magic" and press Enter
    Choose "1. Default settings" and press Enter (or just wait for Automatic boot)
    At the Desktop, click Cancel for the "Parted Magic Timezone"
    Double-click "File Manager"
    The drives will be shown in the left-hand column
    * If you are unfamiliar with Linux drive letters, go to the "Drive Letters in Linux" section below *

    Click on the "source" drive (a new drive tab will open)
    Right-click on the files you want to copy, and click "Copy"

    Click on the "destination" drive (another new drive tab will open)
    Right-click in the destination drive area, and click "Paste"

    Repeat as necessary

    When you are done copying data, close File Manager
    Click the "Start Menu" button (bottom left corner)
    Click "Logout"
    Click "Turn Off Computer"


    Drive Letters in Linux:
    Linux does not use drive letters like C: or D:

    sda is the first physical drive (probably your C: drive)
    sda1 is the first partition on the first physical drive
    *There may be multiple partitions on the drive, so identify them by capacity

    sdb is the second physical drive (probably your USB HDD or flash drive)
    sdb1 is the first partition on the second physical drive


    Mounting Drives:
    If you plugged in a USB HDD or flash drive after booting UBCD5, it will NOT be automatically mounted.
    You must manually mount the drive before File Manager can see it.

    Click the "Parted Magic Mount" button (next to the "Start Menu" button)
    Identify the drive you want to mount (Ex. /dev/sdb1)
    Leave "Read-only" UNCHECKED
    Click the "Mount" button
    The drive should now be visible in File Manager


    For more info about copying files with Parted Magic: https://fixit.litten.com/linuxfilecopy.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •