-
Member
Asus P4S800D-X Bad BIOS Checksum. Starting Bios Recovery...
My friends computer is coming up with Bad BIOS Checksum. Starting Bios Recovery...
It is a Asus P4S800D-X.
I have tried the cd and downloading and renaming bios files to the P4S800DX with different versions.
But all come up with error "Failed to flash!"
I don't know what to do now...and this board has the bios solider in.
Samsung SyncMaster 2343bwx
XFX 680i LT
Intel Core 2 Quad Q6600
4x OCZ SLI-Ready DDR2 800MHz 2048MB
2x eVGA GeForce GTX 465 SC SLI
Seagate Barracuda 7200.12 ST31000528AS 1TB
LiteON DH20A3H
LG GGW-H20L
LG GSA-H10L
Windows 7 Home Premium 64-bit
-
Mod w/ an attitude
Is the a BIOS protection jumper enabled?
Have you tried changing the battery?
-
Member
Originally Posted by Sterling_Aug
Is the a BIOS protection jumper enabled?
Have you tried changing the battery?
Changed the battery, no luck there.
I do not see a protection jumper listed in the manual for this board.
Samsung SyncMaster 2343bwx
XFX 680i LT
Intel Core 2 Quad Q6600
4x OCZ SLI-Ready DDR2 800MHz 2048MB
2x eVGA GeForce GTX 465 SC SLI
Seagate Barracuda 7200.12 ST31000528AS 1TB
LiteON DH20A3H
LG GGW-H20L
LG GSA-H10L
Windows 7 Home Premium 64-bit
-
Mod w/ an attitude
Can you boot into the BIOS to check the settings?
Have you tried clearing the BIOS yet?
-
Member
Originally Posted by Sterling_Aug
Can you boot into the BIOS to check the settings?
Have you tried clearing the BIOS yet?
Can't boot into BIOS. It goes straight into BIOS recovery mode for Asus Crash Free BIOS.
And yes I tried clearing it.
I am going to see if I can get into Asus EZ Flash, but I doubt I can if I can not get into BIOS itself.
Samsung SyncMaster 2343bwx
XFX 680i LT
Intel Core 2 Quad Q6600
4x OCZ SLI-Ready DDR2 800MHz 2048MB
2x eVGA GeForce GTX 465 SC SLI
Seagate Barracuda 7200.12 ST31000528AS 1TB
LiteON DH20A3H
LG GGW-H20L
LG GSA-H10L
Windows 7 Home Premium 64-bit
-
Member
I can not go into EZ Flash.
It goes into Crash Free right away...and fails.
Samsung SyncMaster 2343bwx
XFX 680i LT
Intel Core 2 Quad Q6600
4x OCZ SLI-Ready DDR2 800MHz 2048MB
2x eVGA GeForce GTX 465 SC SLI
Seagate Barracuda 7200.12 ST31000528AS 1TB
LiteON DH20A3H
LG GGW-H20L
LG GSA-H10L
Windows 7 Home Premium 64-bit
-
After I reconnect the power supply from wall AC cord, my PC cannot start normally.
The BIOS always need to recovery. Can I solve this problem from online " BIOS updated" ?
-
-
Replace the BIOS battery.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|