-
Dead Packard Bell Imedeia 1308
Hi
my machine stopped working while being used ,I was able to restart but next time I tried, it wouldnt start
when the power button is pressed the CPU cooling fan and the power fan gives a fraction of a turn before going back to its origonal position
the only other power supply I have is one designed for AMD which shows an overall 12 V capacity of 10A the power supply in the computer shows 2 X12V supplys one at 8A to the long connector and one at 14A for the 4 way connector near the CPU
Is there an easy way of checking the power supply other than replacement ,what else is likely
I have tried replacing RAM with known good one
Thanks for any help
-
Mod w/ an attitude
Power supply would be my first choice.
Look for a sticker on it with a part/model number. Search the internet for that number. I would replace it with an identical one unless you want to buy a new case/power suply and move everything over.
-
Member
That's the way my computer was behaving last week, and it turned out to be my power supply.
-
Thanks for the replys
I have now followed some instructions for checking power supply
ie bridging pin 8 (green wire) with black common wire this gives correct voltages except for the +12V wich reads 11.45V (this is off load)I dont know if this is the cause of the problem or is an acceptable variation
-
Extreme Member!
Check the motherboard capacitors:
www.badcaps.net
It's quite possible that the motherboard is at fault here. A power surge can leave the power supply *looking* like it's working, but the surge often damages the motherboard.
Check the caps first. If no joy, try a different power supply. Its cheaper than trying a new motherboard.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|