Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: What's the oldest computer you still use.

  1. #1
    Member DKJones96's Avatar
    Join Date
    Jul 2006
    Location
    Albuquerque, NM
    Posts
    189

    What's the oldest computer you still use.

    I'd like to know what the oldest computer you still use around the house/workplace to do a task and what's it's specs. Anyone that's read my posts know I don't like it much when older systems are retired...mostly because I find they are some of the most reliable systems around lol. I just had to retire a 486DX33 because it had a proprietary case and there wasn't really a way to salvage that PS/2.

    The oldest computer in use right now is an 80286@20MHz dated 1983. It is used to manage my home-made backup battery and generator system and controls engine speed in regards to current demands and estimates hours of fuel left, oil changes, fuel getting old stuff like that. Runs DOS 4.0 with 8MB of ram and an old 100MB HDD and connects to the generator and sensors with the serial ports. I haven't restarted that machine in 8 months 23 days according to the timer I wrote into the program.

    The oldest computer I use at least once a week now is gonna be a P133 system with 192 Megs simm EDO memory, 8HDDs on PCI raid controllers for storage, sits in a closet doing nothing but routing stuff over the network.
    Dell Optiplex GX270 Small Form-Factor
    P4HT 3.4GHz (from 2.4), 2GB DDR400
    XFX 6200 Low-Profile, 320GB 7200rpm SATA
    Custom Built 350W Power Supply
    DVD-RW, Acer 22" Widescreen

  2. #2
    Member
    Join Date
    Jan 2006
    Location
    Columbus, OH
    Posts
    236
    The oldest I know of is one I built for my sister-in-laws baby sitting kids. An HP Vectra500 with a pentium processor @200mhz its still overclocked to around 240mhz. I maxed out the EdO Ram. I think its got 128mg don't really remember. It has a trident video card and a 1gig hdd. Running WIN98. I gave it a 56k modem but its not being used.

  3. #3
    Senior Member pandaz3's Avatar
    Join Date
    Jul 2001
    Location
    Hillsboro, Oregon
    Posts
    865
    The oldest I have available to me is a P3 1000 that I am using folding. I am contemplating pulling it out of the Gateway case and putting a EPoX Socket A board in there as I will get two and a half times more speed and I don't want to but a yet another case.
    Rig 1, MSI K9A2 Platinum, 6400 Blackie, 2 X 2048 AData, MSI 3870; Rig 2, MSI K9A2 CF, 5000 Blackie, 2 X 1024 Patriot PC6400, ATI X1900 XT, Rig 3, Abit AN8 Fatal1ty, Opteron 185, 2 X 1024 Corsair PC3200C2PT ATI X1950 XTX Rig 4 Abit UL8 3800 X850 Pro

  4. #4
    Guest leprechaun_40's Avatar
    Join Date
    Jun 2002
    Location
    In your dreams
    Posts
    2,671
    I still have the first machine I ever built. From 1998.

    AMD K6-266 with 256 megs ram, 8 gig HDD, 2 gig HDD, 2 gig SCSI HDD, floppy, CD reader, SCSI Burner, 2 paralell ports, SCSI adaptor, zip 100 (now deceased ).

    I use it for my scanner and web cam at the moment. Runs Windows ME like a top when I fire it up though.

  5. #5
    Member DKJones96's Avatar
    Join Date
    Jul 2006
    Location
    Albuquerque, NM
    Posts
    189
    A 486DX2-50 is the first machine I ever built and I beat quake on it using a VESA video card @320x240 like 3 FPS but it ran. My first decent computer(at the time) was a k6-2 350. Oc'd to 495(wouldn't break 500 barier even with 3.3V) ran it at 3.1V safe maximum was 2.7v on that 2.2v core. Ran great till it died by erroring all the time even at 166MHz and 2.7v. That's when I retired it. It took about 6 months to die to that point. such a slow painful death. I overheated the hell out of it too but it ran like a trooper 24-7 for about a year and a half. With what I know now I'm suprised it even lasted that long. The RivaTNT it had died not too long after the processor, probably for the same reason lol.
    Last edited by DKJones96; 09-21-2006 at 11:50 AM.
    Dell Optiplex GX270 Small Form-Factor
    P4HT 3.4GHz (from 2.4), 2GB DDR400
    XFX 6200 Low-Profile, 320GB 7200rpm SATA
    Custom Built 350W Power Supply
    DVD-RW, Acer 22" Widescreen

  6. #6
    Ultimate Member _Mystical_Night's Avatar
    Join Date
    Oct 2002
    Location
    Mars
    Posts
    1,178
    i gave away all my old pc's lol ... oldest one i have now is the one in my siggy until october/nov
    Intel Core i7 920 | Gigabyte GA-EX58-UD4P| 6GB OCZ Platinum DDR3 1600| EVGA GeForce GTX 260 |Vigor Monsoon III LT| Antec Quattro 1,000W PSU | Windows 7 x64

  7. #7
    Member jadinolf's Avatar
    Join Date
    Mar 1999
    Location
    Ojai, CA USA
    Posts
    198
    Mine goes back to Nov 4, 1995 but only the case and power supply are original.

    P1 233MMX
    64 Megs of Non EDO memory.

    It originally was 486 DX4-100

    Memory, by the way, cost $1200.
    jadinolf©1999

  8. #8
    Junior Member WBWatson's Avatar
    Join Date
    Mar 2006
    Posts
    23
    I'm still using it but I want to built a whole new rig. Everything in this box is original with exception of some of the ram, lite-on burner and vid card.

    Foxxconn mid tower TU124 ATX with 350 Apex PS
    MSI K7N2L Motherboard
    AMD Athlon XP 1700 (1.47Hz)
    2 gig Ram (Samsung/Crucial)
    Western Digital 40 gig, 7200 rpm HD
    Asus 52x CD-ROM
    Lite-on CD-RW
    Nvidia GeForce FX5200
    Mitsumi floppy
    WinXP home

  9. #9
    Senior Member naptownman's Avatar
    Join Date
    Jul 2002
    Location
    Indianapolis
    Posts
    582
    I still use a Sony PCG-N505VE notebook, 10.4" display, 300 MHz Celeron, 128M ram (I upgrade from 64megs a couple years ago) and Win 98SE.

    I'm about to get a fresnel lens for the display. Its native resolution of 1024 x 768 or something like that on a small screen size is more than my old eyes can see well anymore.

  10. #10
    Ultimate Member cdroman's Avatar
    Join Date
    Sep 2002
    Location
    in limbo
    Posts
    1,741
    The oldest computer I still use is mine; about 2 1/2 years old. Still have a fujitsu drive in it from 1998 that I use for Linux try-outs.
    SAVING FACE OR LOSING FACE

  11. #11
    Member DKJones96's Avatar
    Join Date
    Jul 2006
    Location
    Albuquerque, NM
    Posts
    189
    I'm a little worried that the 286 is gonna succumb to silicone degredation soon
    Dell Optiplex GX270 Small Form-Factor
    P4HT 3.4GHz (from 2.4), 2GB DDR400
    XFX 6200 Low-Profile, 320GB 7200rpm SATA
    Custom Built 350W Power Supply
    DVD-RW, Acer 22" Widescreen

  12. #12
    Member jadinolf's Avatar
    Join Date
    Mar 1999
    Location
    Ojai, CA USA
    Posts
    198
    Quote Originally Posted by DKJones96
    I'm a little worried that the 286 is gonna succumb to silicone degredation soon
    I cerainly hope not.
    jadinolf©1999

  13. #13
    Member
    Join Date
    Jan 2006
    Location
    Columbus, OH
    Posts
    236
    A 286, hmmmn...... is that still considered a computer?

  14. #14
    Member
    Join Date
    Jan 2001
    Location
    Fairfax County, Virginia
    Posts
    367
    That 20MHz 286 will be hard to beat for age. That goes back nearly to the original PC/AT, doesn't it?

  15. #15
    Member DKJones96's Avatar
    Join Date
    Jul 2006
    Location
    Albuquerque, NM
    Posts
    189
    That depends on your definition of computer. If your talking gaming it'd probably take the 286 a day or so to render one frame of these new 3d games. especially with it's 16MB physical memory limit. There are palm pilots that process way faster then this thing but you can't beat it's reliability. My g/f spilled a glass of water IN the case all over the motherboard a couple years ago and it ran fine till I shut it down to dry it off and it doesn't pull much of anything for power to run the system.

    And yeah it does date back pretty far. This processor is so old it has a clock DEVIDER to the system bus. Devides by 2.

    Could you imagine how a system today would run with a bus clock ratio of 1:1...

    I am planning on replacing that thing soon tho. I'm still working on the mainboard design but i'm working on getting a couple 68000 series processors running flash memory and socketed sensor expansion slots to make the generator fuel injected. With that I'll be able to customize how it runs entirely...Now what to do with a system that weighs 30 pounds, is 20MHz and takes 4.5 cycles to complete one instruction...
    Dell Optiplex GX270 Small Form-Factor
    P4HT 3.4GHz (from 2.4), 2GB DDR400
    XFX 6200 Low-Profile, 320GB 7200rpm SATA
    Custom Built 350W Power Supply
    DVD-RW, Acer 22" Widescreen

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •