-
Need help updating BIOS and installing OS on new PC - Asus Mobo
Hello,
I just finsihed putting together putting together my second PC. Here is the hardware that is in it:
Pentium 950
Asus P5N32-SLI Deluxe Mobo
Corsair XMS Pro PC6400 DDR2 (2gig)
Enermax NoiseTakerII 600w PSU
Evga GeForce 7900 GT KO
I have a floppy drive connected, but not the HD since I wanted to make sure I could get to a POST screen before putting the rest together.
As far as I know, the 950 Pentium is only supported with the most recent BIOS, v 3.10. I am sure this board does not have it.
Upon first boot, it gave me the message that the CPU has been changed, hit X to configure or X to continue. So I hit one of the keys to continue, then it brought me to the next screen saying there was no boot device available. Insert disk and press a key. So I inserted the floppy I made on my other PC with the new ASUS BIOS ROM file, and hit a key. It then told me to remove all disks, then hit any key. I did that, and it came back with insert boot disk. So that did nothing.
I shut it down, then the next 4 times I tried turning it on I got a blank screen, the fans and RAM lit up, but no POST screen. I guess I need to do this through a DOS prompt, but am not sure how.
Where do I go from here?
Thanks for any help guys!
My home-grown system:
Asus P4C800-E Deluxe
Northwood 3.2 - OC to 3.6
1 gig Corsair XMS
Aspire X-Dreamer II Case
PNY GeForce 6800 128mb
74gig Raptor SATA
200gig Caviar SATA
Audigy 2 ZS
-
And oh yes, all the power connections are connected on the mobo, as well as the GeForce. I got a picture upon first boot, but nothing after subsequent restarts. Any ideas?
-
Senior Member
03DSGSnake-
Sounds like you've corrupted the BIOS while attempting to update it. It probably needs to be sent to the manufacturer for a BIOS replacement.
LPTECH
-
Originally Posted by lptech
03DSGSnake-
Sounds like you've corrupted the BIOS while attempting to update it. It probably needs to be sent to the manufacturer for a BIOS replacement.
LPTECH
Well I didn't update it becase after it asked to insert a boot disc, I put the floppy in and hit OK, then it said remove all dics and hit a key, which I did, then it asked for a boot disc again... over and over.
So I turned it off and tried again with the disc in the drive and got nothing on the screen.
My home-grown system:
Asus P4C800-E Deluxe
Northwood 3.2 - OC to 3.6
1 gig Corsair XMS
Aspire X-Dreamer II Case
PNY GeForce 6800 128mb
74gig Raptor SATA
200gig Caviar SATA
Audigy 2 ZS
-
Originally Posted by 03DSGSnake
Well I didn't update it becase after it asked to insert a boot disc, I put the floppy in and hit OK, then it said remove all dics and hit a key, which I did, then it asked for a boot disc again... over and over.
So I turned it off and tried again with the disc in the drive and got nothing on the screen.
and actually what I had was not a boot disc, just a floppy with the BIOS ROM file, I guess I was unclear about that. According to ASUS I have to enter a command from the DOS prompt to update which I was not at.
I should have made a bootable floppy on another PC first, I think..... not sure never had to do this sort of thing before.
-
One other thing, I'm using a ps2 keyboard while I mess with the system, and when it is turned off the Number Lock light remains on...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|