Results 1 to 2 of 2

Thread: Which fan to use?

Hybrid View

  1. #1
    Member
    Join Date
    Jun 1999
    Location
    Berkeley, CA, US
    Posts
    237

    Which fan to use?

    I bought a micro atx mobo (Asus MEW-AM) and i have a socket 370 celeron 500 Mhz. Which kind of fan should I buy? I just want a decent one, nothing spectacular. I am just worried because there are so many fans and heatsinks out there, I am afraid I might buy the wrong one.

  2. #2
    Senior Member Happy Joe's Avatar
    Join Date
    Nov 2003
    Location
    Colorado
    Posts
    825
    Pretty much any socket 370/socket a heatsink and fan will work.
    the celly 500 isn't a really hot chip so you don't need much. I would get a heatsink that might apply to the next processor you get in socketA/370 (I tend to favor overkill heatsinks) you should expect to pay around $5 to $15 for one with a 60mm fan without shipping (free if you have some friends that have old computor junk piles).
    Ball bearing fans are much preferred as they last quite a bit longer than sleave bearings.
    Overclockers.com has a pretty good comparison of older heatsinks
    http://www.overclockers.com/articles373/socketA.asp
    beware of the high flow/high noise fans and expensive heatsinks used in some of the tests you just won't need them for this processor.
    A good addition is some arctic silver or ceramique heatsink paste, (I always remove the thermal pad that typicaly comes with the heat sink) some form of pad or paste is essential however (don't put a bare heatsink on the processsor and expect it to work well, or long).
    Enjoy!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •