-
Ultimate Member
Post your mobile overclocks here.
These things are awesome. List your CPU, stepping (and any other codes off your chip), voltages, motherboard, and cooling. Here is where I’m at right now. Mobile 2500+ 220x11.5 @ 2530MHz, vcore 1.775 (reported as 1.73-1.74), NF7-S v2.0, SLK-800A with Smart Case Fan II.
AXMH2500FQQ4C Y91147SA40026 IQYHA0352MPMW
-
Senior Member
.... i want a mobile... mine hits 185... at 190 it starts to become unstable :\
-
Ultimate Member
Originally posted by TiGgErDbC
.... i want a mobile... mine hits 185... at 190 it starts to become unstable :\
Take a look at the mobile 2400+, it's cheap and has a barton core. You wouldn't happen to be running a board with a KT400 chipset would ya?
-
Senior Member
no i have a bran new gigabyte 7n400 pro 2 rev 2 with soem OCZ el 3200 cl 2... it just doesnt like being at 190+ fsb. and its locked too. i broke 6k with 3d mark though so that was cool
-
Ultimate Member
Come on. I know there are members with mobiles other than me, and I know why you bought them.
-
Senior Member
I'm not currently running my mobile chip. (I'm converting my gaming machine to internet use so I have replaced it with my desktop 2500 chip).
When I was running the 2500 mobile It maxed out in this A7N8X ( non delux) at 2725 MHz (12.5 X 218). 4 hours prime stable, on air (39C loaded, 21C ambient air temp), without Vmods. It's considerably warmer here now (summer is comming, you know (todays forcast 78deg F)) so I'm not shure that I could maintain those specs today. I may do some Vmods (to attempt a 250 memory clock) but summer activities ( tree felling, cleanup, stump pulling, vehicle maintenance etc) have severly limited my computor time.
Enjoy!
I don't remember the stepping But I favor a ducted SLK900A heatsink with a TT smart fan 2 for cooling. CPU cooling air is filtered through 2 layers of airconditioner filter foam in a custom 3 x 8 inch semicircular holder (more than 30 square inches of filter area (for minimal restriction)). Both the slk and north bridge have been lapped and the northbridge is cooled by a 60x60 mm speeze microfin CPU cooler(aluminum w/cu. insert).
Last edited by Happy Joe; 04-28-2004 at 09:21 PM.
-
Ultimate Member
I knew you had one happy, just a matter of time before you posted here. Just trying to build a little mobile reference guide for all to compare their chips to. It just wouldn’t be right not to have a mobile thread in the cpu and overclocking forum.
-
Senior Member
Agreed
Enjoy!
-
I got my mobile 2600+ prime stable at 200x12 (2.4GHz) at 1.625 volts! Runs nice and cool too! I don't recall the stepping or manufacturing date on it though.
-
I just built my friend a computer with a k7n2-delta-l mb and a 2500+ mobile chip. I didnt try testing the chip to its limit, but i do have it oced to 2.2ghz 200x11 and it runs fairly cool with my volcano 12+. At idle its around 43-44c and after some gameing its around 46c. Its around 80 degrees here, so considering that, i think the heats not too bad.
-
Ultimate Member
Had to up the voltage to 1.8 (shows 1.78). Hopefully the new Antec 550 coming in will help stabilize and stop the big dips in the voltage better than my current generic 420watt. 24 hours prime stable. 220x11.5 @ 2530MHz.
-
Member
I've got my Mobile 2600+ running at 2.5 stable (200x12.5) w/ vcore @ 1.8ish. For some reason it doesn't like to go any higher. I am using a volcano 9, I think it is enough cooling cause it idles at about 46C and load is about 52C. One other thing, when I boot up my computer for the CPU is says "Unknown CPU Type 2500Mhz" This is on my Abit NF7-S v2, So I don't know whats going on there. Let me know what you think.
AMD Athlon 2100+ @ 2.3Ghz
Abit NF7-S v2.0
512MB Hyper-x Dual Channel
Radeon 9500 softmod 128MB
3dmark 2001se - 18093
-
Ultimate Member
Originally posted by suprsheep2
One other thing, when I boot up my computer for the CPU is says "Unknown CPU Type 2500Mhz" This is on my Abit NF7-S v2, So I don't know whats going on there. Let me know what you think.
My NF7-S does the same thing. I think it has something to do with the on the fly multi change. Since the multi can be at any one of the numbers at any given time, the board can't truly identify the cpu. Don't sweat it.
-
Member
Sweet, I didn't think it was anything major. But anything is reasuring
AMD Athlon 2100+ @ 2.3Ghz
Abit NF7-S v2.0
512MB Hyper-x Dual Channel
Radeon 9500 softmod 128MB
3dmark 2001se - 18093
-
Ultimate Member
I wonder if these mobiles will fit into a desktop, and if so, what their oc potential is:
http://www.technewsworld.com/story/i...nws/33697.html
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|