DVD Problem

[jc0088]

Hi, I was having a bit of problem when I back up my disc. Everything was fine and the burning process was 100%, but then it said it displayed a failure message saying that: Buring process failed at Disc at once, I wonder what that means and how I could fix it.
Here provides that log
23:25:03 #47 Text 0 File Writer.cpp, Line 318
23:25:03.561 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:25:33 #48 Text 0 File Writer.cpp, Line 318
23:25:33.921 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:25:39 #49 Text 0 File Writer.cpp, Line 318
23:25:39.671 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:25:41 #50 Text 0 File Writer.cpp, Line 318
23:25:41.140 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:25:48 #51 Text 0 File Writer.cpp, Line 318
23:25:48.765 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:26:13 #52 Text 0 File Writer.cpp, Line 318
23:26:13.436 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:26:18 #53 Text 0 File Writer.cpp, Line 318
23:26:18.749 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:26:29 #54 Text 0 File Writer.cpp, Line 318
23:26:29.108 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:26:36 #55 Text 0 File Writer.cpp, Line 318
23:26:36.452 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:26:56 #56 Text 0 File Writer.cpp, Line 318
23:26:56.358 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:33:05 #76 Text 0 File Writer.cpp, Line 318
23:33:05.436 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:33:13 #77 Text 0 File Writer.cpp, Line 318
23:33:13.311 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:33:24 #78 Text 0 File Writer.cpp, Line 318
23:33:24.124 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:34:47 #79 Text 0 File Writer.cpp, Line 318
23:34:47.171 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:34:55 #80 Text 0 File Writer.cpp, Line 318
23:34:55.390 - SONY DVD RW DRU-510A : Queue again later (Intervall : 11msec)

23:35:35 #81 Text 0 File WriterStatus.cpp, Line 112
<SONY DVD RW DRU-510A > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

23:35:35 #82 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

23:36:15 #83 SCSI -1135 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x23 0x57 0x50 0x12
0x00 0x00 0x00 0x00 0x0C 0x08

23:36:15 #84 CDR -1135 File ThreadedTransferInterface.cpp, Line 1594
Write error

23:36:15 #85 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once

23:36:15 #86 Phase 38 File APIProgress.cpp, Line 232
Burn process failed at 4x (5,520 KB/s)

[mpacey]

I would suggest you try CloneDVD.

It is available here:

http://www.elby.ch/en/products/clone_dvd/index.html

[BipolarBill]

If the source DVD has copy protection, it my not be possible.

One thing I can tell you is that you should disable your antivirus program while burning. Re-enable it immediately afterward!

[zybch]

BPB, is that the case with all AV programs?
I have never temporarily disabled my scanned, the DVDs burn just fine.

[BipolarBill]

It would depend on the burner and the AV program in use. My NEC ND-1500A won't burn with Norton on.