Post Your Case Mod

[dajogejr]

Well...MY PC is in the basement....where it's nice and cool

[BryanM]

Started out the outside was ganna be back and the inside chrome, but the chrome and the clear coat didnt mix right so now its like a gloss black outside and a metalic black inside. Has 2 Green UV 80mm fans. Yellow heatshrink, UV IDE and floppy cable two UV cathodes. Artec CD-RW, 4 two-way switchs, card reader, and sony dvd-rw drive all custom painted, well except the sony drive cause i aint rippen that thing apart to paint it. Cut a blow hole on top along with a window in the side, and also a fan mount in the PSU. Powered by a 2800+ and ATI 9700 and some **** ram. not too bad for a $35 case. That Cathode should be hidden, and i have to do something with that PSU.

[megaspazz]

pretty wild lookin' mobo... what is it?

nice case!

[crossedup]

Is that an old ACER case?

Got one looks just like that. I painted it candy apple red and built the boys computer in it.

Nice cases for thier age.

[BryanM]

its a Soyo Kt400 Dragon Ultra plat ed, naa its just some case i picked up off tiger direct a year ago, stated off like this http://images.tigerdirect.com/skuima.../B452-1018.jpg IGNORE THE FLAT IDE CABLE TOO, didnt have a extra clear round to use for the riad

[CaptHandsome]

First off...Strawbs very nice case...not only does it look good, but its freakin tidy...not a wire or cable to be seen, thats one of the great things about have the HDD bays side to side instead of front to back. Very nice job.

I just ordered some green LED fans to match my case...as soon as i get em installed imma post pics. Im actually REALLY excited. Can ya tell?

[sevenbeansalad]

First of all the pc specs:

epox 8rda+ v1.1
xp2500 @ 2800 (2ghz)
512mb pc3200 Geil
ATI 9800np
80 gig maxtor
lite-on cdrw
Sparkle 300watt

Here is the heatsink I am using except that I took out the 70mmx15mm fan and put on an 80mmx25mm.
http://xoxide.com/taisk7heatpi.html

I have one 92mm fan in the front blowing in and a 120mm blowing down from the top both hooked up to the fan controller to the bottom right of my primary monitor. The switches to the left of the baybus are for my secondary power supply and my blue cathode. The two case fans and blue cold cathode are powered by the secondary power supply.

Here are some pictures.

http://www.villagephotos.com/pubbrow...elected=818399


Christopher

[crossedup]

You got that thing built into your desk? Looks pretty neat. Had thought about trying that once. Nice to see the concept working

[jet.]

My beauty, just needs some serious watercooling now.

[Strawbs]

Originally posted by jet.

My beauty, just needs some serious watercooling now.

Has that case got side mounted drive bays too? looks very tidy inside.

You must have O\C'ing in mind to want watercooling, what are your current specs\temps?

Thanks Capt* ...I prefer to tuck the wires away where possible, it makes for better Airflow!

[jet.]

Originally posted by Strawbs
Has that case got side mounted drive bays too? looks very tidy inside.

You must have O\C'ing in mind to want watercooling, what are your current specs\temps?

AMD T'Bred B DLTC3 1700+ @200x12.5 2.5Ghz w/ Vantec Aeroflow
45C idle, 50-55C load, 1.85 vCore, 2.7 vDimm, 1.7v Chip, AGP 1.5v
Abit NF7-S 2.0 BIOS 1.4b nForce 2.03 drivers w/Vantec Iceberq Cooling Kit
TwinMos Winbond w/Vantec Heatspreaders 3x256MB 6/3/3/2 @ DDR400
Sapphire Radeon 9700 w/Tweakmonster rev4.0 ramsinks 350/290 Cat4.3
Western Digital 80GB/120GB Cavier’s w/ 8mb Cache (Side Mounts)
Thermaltake Xaser III Case & Antec Truepower 380W PSU

---------------

I think i could push my CPU to 2.0/2.1 vCore with WC, who knows what i'll be able to OC with it. My graphics card is maxed though due to bad Infineon memory, so a new graphics card looks set for when the R420's are out. I dunno, i'm just pushing for WC because i've never done it before and want to get stuck into something new.

[MJCfromCT]

Here's the specs:

AMD 2700+
Radeon 9800 Pro
1 GB PC 3200
140 GB HDD
580W Power Supply
Asus A7N8X-E Deluxe
DVD+R Drive
CD-RW Drive
6 LED fans
2 Cathode lights
TV Tuner
Thermaltake Xaser II series case

here's a pic (i know the wires are kinda messy, thats the next step, after dusting )

[MJCfromCT]

another pic, closer up...

[MJCfromCT]

last one...

here's one w/the lights off...

[Strawbs]

Whoa! That thing is "Red" ...er ... with a vengeance. was the case interior already "Red" when you got it, or did you spray it "Red" yourself?

It's different, I like it.