-
nero express data burn problem
i have recently purchased a new CD/rw and got nero express OEM with the deal
it works fine copying cd to cd, but will not end a session when burning data, i have the log file below
7 shagged cdr's later , i have contacted nero or ahead and they say 3 working days to answer .i need to back up my docs sooner than that.
anyone have any ideas?
Mod note: removed possible serial#
Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 12/11/98 12:06:00
Nero Version: 5.5.10.26 (Nero Express)
Recorder: Version: M.GD - HA 0 TA 1 - 5.5.10.26
Adapter driver: HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: 0213 - HA 0 TA 0 - 5.5.10.26
Adapter driver: HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
HITACHI DVD-ROM GD-5000 (Target 0, D: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
ATAPI CD-RW 52X32 (Target 1, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523140kB)
Free physical memory: 4MB (4928kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
6.1.2004
CD-ROM (ISO)
14:41:50 #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:41:50 #2 Phase 87 File dlgbrnst.cpp, Line 1655
Seamless Link activated
14:41:50 #3 Text 0 File Reader.cpp, Line 115
Reader running
14:41:50 #4 Text 0 File Writer.cpp, Line 125
Writer ATAPI CD-RW 52X32 running
14:41:50 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
14:41:50 #6 Text 0 File Burncd.cpp, Line 3735
Turn on Track-At-Once, using CD-R/RW media
14:41:50 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 160913 (160913) = #160913/35:45.38
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
14:41:51 #8 Text 0 File DlgWaitCD.cpp, Line 221
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 160912 (35:47.37)
14:41:51 #9 Text 0 File DlgWaitCD.cpp, Line 226
Write in overburning mode: FALSE
14:41:51 #10 Text 0 File DlgWaitCD.cpp, Line 1678
Recorder: ATAPI CD-RW 52X32;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
14:41:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ATAPI CD-RW 52X32 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 329857024
14:41:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
14:41:51 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 160913 (160913) = #160913/35:45.38
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 160911 blocks [ATAPI CD-RW 52X32 ]
--------------------------------------------------------------
14:41:51 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
14:41:51 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
14:41:51 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 52x (7,800 KB/s)
14:41:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
14:41:51 #18 Text 0 File Mmc.cpp, Line 17869
Set BUFE: Seamless Link -> ON , Auto Pilot : ON
14:45:15 #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
14:45:22 #20 Text 0 File Mmc.cpp, Line 12869
start Close Session
14:49:22 #21 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
14:49:22 #22 MMC -1169 File ThreadedTransferInterface.cpp, Line 994
Logical unit not ready, operation in progress
14:49:22 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
14:49:22 #24 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0525F88C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0x04 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
14:49:22 #25 MMC -1023 File ThreadedTransferInterface.cpp, Line 994
Command sequence error
14:49:22 #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
14:49:22 #27 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA70
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
-
14:49:22 #28 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA70
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
14:49:22 #29 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA6C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
14:49:22 #30 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA6C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
14:49:22 #31 MMC -1023 File WriterStatus.cpp, Line 168
Command sequence error
14:49:22 #32 TRANSFER -39 File WriterStatus.cpp, Line 168
Could not perform EndSession
14:49:22 #33 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 52x (7,800 KB/s)
14:49:53 #34 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
14:50:03 #35 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23/04/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 18:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 31/03/03 15:31:06
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 31/03/03 15:31:06
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 10/04/00 07:10:56
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 23/04/99 22:22:00
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23/04/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23/04/99 22:22:00
File 'ZMPROP.CPL': Ver=Version 2.0, size=33280 bytes, created 02/12/03 18:23:32
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 23/04/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 23/04/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23/04/99 22:22:00 (Adapter driver for rec)
Registry Keys:
thanks
jp
-
Ultimate Member
Re: nero express data burn problem
Welcome to SysOpt!
Is that a multisession CD-R? Was it written before? Are you trying to overburn? Media quality is sometimes associated with this error, have you tried different CD-Rs?
i need to back up my docs sooner than that.
Get another burning software for now: http://download.com.com/3000-2646-10...l?tag=lst-0-18
Last edited by bassman; 01-07-2004 at 11:00 AM.
-
the cdrs are 52x 700mb it doesnt say multi session on the box
i have tried different cdrs phillips and packard bell
the system will write cd to cdr direct copies of music ,also music from the HD to cdr and HD to 12x CD/RW with no problem.
not sure if im overburning.
cannot find option in program to slow down the burn speed.
the drive is a benQ 52x32 and the program (nero )is trying to burn at 52x
thanks
jp
-
Ultimate Member
Originally posted by lostplanet
cannot find option in program to slow down the burn speed.
I use Nero but not the Express version, but you should be able to set the burning speed manually. Does it use a wizard? If so, disable it on the Help menu.
-
8 cdrs now and no joy, i tried burning at 32x made no difference,
the program tells me there is an error and then locks up leaving the CDRW still spinning and system freezes, have to restart system
Last edited by lostplanet; 01-07-2004 at 01:00 PM.
-
Ultimate Member
Originally posted by lostplanet
Nero sux 8 cdrs now and no joy
I already posted a good freeware cd burner
-
apologies to nero
the zillasoft is doing the same thing, wont close the session
i chose joliet file format and 52x write speed for data
whats going on?
-
Ultimate Member
Well, it probably isn't Nero; what brand is the CD-RW drive. Also, post your system specs.
-
jabil kadoka mobo AMD athlon 600 mhz 512mb sdram 20 gb 5200 HD win 98se
i have got nero to burn at 24x to CDrs (surely nero should select the correct write speed)?
CD/RW= benQ 52x32x52
Last edited by lostplanet; 01-07-2004 at 04:08 PM.
-
Member
my copy of Nero reports a buffer under run error at the very end of burning. (The CD is 100% usable. Nero doesn't seem to know that the buring process is done.).
This happens even at 1x burning speed.
Does anyone else have this problem?
-
Ultimate Member
Originally posted by lostplanet
surely nero should select the correct write speed
No, it's the user who selects the speed. What can you record at 24X? CD to CD? Or hard drive to CD?
How is the burner connected? Is it primary slave?
-
Ultimate Member
lostplanet: your drive is not supported by Nero - anyway, update your copy and try again
-
Ultimate Member
Originally posted by frnkzks
my copy of Nero reports a buffer under run error at the very end of burning.
How do you know it happened in the end of the process?
-
Senior Member
Nero will only burn at the correct speed if the firmware in the burner correctly identifies the media. Might want to look at the firmware version for the drive manufacturer (BenQ is a marketer) and see if an update is available to flash.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|