-
03-21-2003, 11:51 AM
#136
hey im new to this forum...
3dmark 03 runs awful on my sys but ut2k3 still plays fine. i only get a 1250 w/my gf3 and my roommate gets 1850 with his gf4 ti4800 se
athlonxp 1600@1.7
256ddr333
gf3 ti500
it gets really boring watching at 5fps
dont play leapfrog with a unicorn
-
03-21-2003, 01:12 PM
#137
Ultimate Member
Nothing is overclocked, that's just setting all the defaults to highest performance and turning off unnecessary background apps and services.
It's a Pally, I don't really want to overclock it.
But thanks for the votes of confidence
"Dude you're getting a Dell." Obscure curse from the early 21st Century, ascribed to a minor demon-spirit known as "Stephen?" [sp].
-
03-22-2003, 02:03 PM
#138
Member
-
03-28-2003, 08:19 PM
#139
-
03-29-2003, 03:40 AM
#140
not bad..
but actually i think you could definitely tweak some more. my roommate has a geforce4 ti4800 and athlon 1600@1.75 w/512mb ddr and gets over 12500 in 3dmark2k1. you could probably get at least 13-13.5k. im not as familiar with ati tweaking b/c im kind of an nvidia fan, but did you make sure that all of the settings are for max performance? i think the default settings are for a trade-off between quality and performance, i cant remember. change everything to highest performancec. did you check the bios and the driver setting to make sure the card is in 8X agp mode? make sure the agp aperature setting in the bios is set for half your ram, (or the highest setting). are you oc'ing the card as high as it will go? maybe the fact that your ram is only pc2100 could have something to do with it. you've probably done this stuff already, but if you haven't, its worth a try.
dont play leapfrog with a unicorn
-
03-30-2003, 08:24 PM
#141
After BIOS mod on a ATI 9500 Pro, went from 3605 to 4179.
-
03-30-2003, 10:04 PM
#142
Member
3860 3DMarks 3DMark03
ASUS P4S8X mobo
P4 2.4 GHz
9700 Radeon Pro w/ catalyst 3.2
512 MB PC2700
5.1 Soundblaster Live
WD 1200GB
-
03-31-2003, 02:47 AM
#143
4817
P4 3.06
Sinxp
AIW 9700
1024 MB TwinX3200 at 333 Mhz, 2-2-2-6
WD 120 GB 8Mb
-
03-31-2003, 02:49 AM
#144
1216
1600xp+ UNDERclocked to 1050
GF4 4400 128mb box stock
kingston 512 pc2700 stock voltage
CPU temps never went above 55 degrees C.
system temps- 34 degrees C.
EDIT: got everything running correctly. the 1600xp running @1400 and the 4400ti not clocked and/or the 2700 ram.
basically stock settings.
new score: 1536
also got a new heatsink and cpu fan this weekend and the temps dropped to 47c idle or load.
Last edited by BigSmith; 04-08-2003 at 03:17 AM.
-
03-31-2003, 10:04 AM
#145
HAHA underclocked to 1050? thats b/c your fsb speed is set to 100mhz. go into the bios and change it to 133 and it will register as an xp1600. if you have the pc2700 ram then you can overclock it by going higher. i have my fsb set at 160 and it registers as an xp2200 at 1.7ghz. try that and run 3dmark again...that should help :-P
dont play leapfrog with a unicorn
-
03-31-2003, 03:20 PM
#146
Member
Mr. Underhill
??
How did you get such a good score 2003 and so low in 2001?
I'm using 2700@2574 ATI 9700 pro and P4 3.06@3624 G4 ti 4600
just under 18000 2001 on the 2700...2003 just under 4000
just over 17000 2001 on the P4 ........2003 just under 3000
Setting?
-
03-31-2003, 03:26 PM
#147
Originally posted by Beast_USA
Mr. Underhill
??
How did you get such a good score 2003 and so low in 2001?
I can't explain it. Ever since upgrading to DirectX 9.0 and Catalyst 3.2 drivers, I've felt that my 3DMark2001 weren't that great. Upon installing the 2.4GHz P4, they rose considerably, and I was pleased. However, I was THRILLED by my 2003 score. I don't know what to say. I'm not so experienced with Benchmarking yet that I can hypothesize. Perhaps better minds than mine here on the board can explain. Anyone care to take a shot?
-
04-07-2003, 07:14 PM
#148
Member
Last edited by Andiesean; 04-07-2003 at 07:18 PM.
ASUS P4S8X
P4 2.4GHz
ATI Radeon 9700 Pro
SoundBlaster Live 5.1
Creative Inspire 5.1
WD 120 GB HDD
1GB PC2700
TDK VeloCD 48x CDRW
Lite On DVD Rom
Antec SX1040BII case w/ 400w PSU
Windows XP Home
-
04-12-2003, 03:15 AM
#149
Member
ha ha ha....
gigabyte GA-8IE533
P4 2.4B Ghz
128 Kingston PC2100
128 Kingmax PC2700(back clocked)
256 PCRAM PC2100
inno3d GeForce4 MX440se
3DMARK03 SCORE: 232
SINCE I CAN ONLY RUN THE FLYING GAME AND THE FILL RATE TEST..
-
04-12-2003, 03:29 AM
#150
Member
because GeForce MX series dont have Pixel shaders....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|