-
Ultimate Member
Originally posted by causticVapor
BTW -- I expect 2GHz, no less with that XP 1800+ and your H20 system. If your board allows 2vcore, you can reach 2.2GHz no prob.
I already had it at 1.91 on 1.6V. That was using 166 x 11.5, which didn't work too well because I don't have a 1/5 divider. My 15x multiplier is messed up on my board. It seems to work as a 5x multiplier. Maybe I should flash my bios so I can get 133 x 15?
This is where my signature would go if I wasn't so lazy.
-
You've got to be kidding me. That's an A core? I had that exact same stepping, and it required 1.95vcore to run at 2GHz reliably. This was at a core temp of 26 degrees celsius, mind you.
Then again, others have had it at 2GHz and only 1.8v.
What range of multis do you have on your board? You could try 160*12.5 and see how that works out. (12.5=13)
And BTW I always flash my boards with the latest BIOS. Try and see if you can get those higher multis..... but without phsyically connecting all of the bridges, I doubt you will.
Last edited by causticVapor; 02-23-2003 at 05:33 PM.
-
Ultimate Member
I got my pally up to 1920 @ 1.85V, but it was locked. 157 caused problems, I don't wanna try 160.
I've got a windshield defroster fixing kit, so maybe I'll just manually unlock it and set the default voltage to 1.75. (so I can get 1.85 )
This is where my signature would go if I wasn't so lazy.
-
Member
alright guys whats a good motherboard for cheap i mean around 100 or 120 maybe cause this KT3 is making me mad with the low multipliers it says it can go up to 15 but i choose 15 and it doesnt boot even at 133 and less
Athlon XP 2100+ @ 2.24 (178X12.5)
512Mb DDR400 (Corsair)
80Gb WD 8Mb Cache
Radeon 9000 Pro 128mb DDR
MSI KT3 Ultra 2
SB Live! Value
Intel NIC
2 CD-RW 8x4x32 & 2x4x24 (im cheap)
TwEaKist
-
Ultimate Member
Same problem here.
Get an Epox 8rda. $88 at newegg.
This is where my signature would go if I wasn't so lazy.
-
KT333 boards that won't do 333 FSB. Oh man.
If feel sorry for you folks.
Get the 8-RDA/+ and don't look back.
-
Member
would trend micro have epox boards?
GP?
Athlon XP 2100+ @ 2.24 (178X12.5)
512Mb DDR400 (Corsair)
80Gb WD 8Mb Cache
Radeon 9000 Pro 128mb DDR
MSI KT3 Ultra 2
SB Live! Value
Intel NIC
2 CD-RW 8x4x32 & 2x4x24 (im cheap)
TwEaKist
-
Senior Member
I have a KT133a that'll do 166/333 FSB stable....
anyway.. any Nforce2 board would be a good choice.
-
Member
the thing is i cant buy anything online no one is willing for me to give them cash then buy a mobo online BASTERDS
Athlon XP 2100+ @ 2.24 (178X12.5)
512Mb DDR400 (Corsair)
80Gb WD 8Mb Cache
Radeon 9000 Pro 128mb DDR
MSI KT3 Ultra 2
SB Live! Value
Intel NIC
2 CD-RW 8x4x32 & 2x4x24 (im cheap)
TwEaKist
-
Member
hey GP you said you live on UoM campus? PM me with the where abouts
Athlon XP 2100+ @ 2.24 (178X12.5)
512Mb DDR400 (Corsair)
80Gb WD 8Mb Cache
Radeon 9000 Pro 128mb DDR
MSI KT3 Ultra 2
SB Live! Value
Intel NIC
2 CD-RW 8x4x32 & 2x4x24 (im cheap)
TwEaKist
-
Member
Hey GP and cV 2.2Ghz from an athlon 2100 i can go higher still right now 170x13 @1.825v yea i did the pin trick i got it to work i used a conductive pen instead i'll post with new proc speeds oh yea maxed out at 36c Chilly anyone after leaving priming for 8hours
Athlon XP 2100+ @ 2.24 (178X12.5)
512Mb DDR400 (Corsair)
80Gb WD 8Mb Cache
Radeon 9000 Pro 128mb DDR
MSI KT3 Ultra 2
SB Live! Value
Intel NIC
2 CD-RW 8x4x32 & 2x4x24 (im cheap)
TwEaKist
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|