Page 4 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 46 to 60 of 71

Thread: TBredA... 1.95GHz on air!!

  1. #46
    Senior Member Grentarc's Avatar
    Join Date
    Feb 2002
    Location
    Wagga, NSW, Australia
    Posts
    759
    mmm.. dremelization is always a good thing.... and Dr Thermals are good.. so it must be good!!!

  2. #47
    Ultimate Member
    Join Date
    Aug 2002
    Posts
    3,922
    Hmm... I might try it with some others...

    Also, I'm thinking of mildly vmodding the R300 in a way similar to x-bit's approach; at least 400/750MHz out of the thing is my goal.

  3. #48
    Ultimate Member Giblet Plus!'s Avatar
    Join Date
    May 2002
    Location
    Evanston, IL
    Posts
    2,821
    Originally posted by Grentarc
    mmm.. dremelization is always a good thing.... and Dr Thermals are good.. so it must be good!!!
    Why not just buy one for that P3? They fit.
    This is where my signature would go if I wasn't so lazy.

  4. #49
    Ultimate Member
    Join Date
    Aug 2002
    Posts
    3,922
    Well, that defeats the whole purpose of dremelization.

  5. #50
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    HEY GP and cV long time no see but here's an OC pic for you need to do the wire trick though but lazy *sigh i'll do it tomorrow or tonight whatever i feel but not very impressive to me.....

    Athlon XP 2100+ @ 2.13 (164X13)
    512Mb DDR333 (Crucial)
    80Gb WD 2Mb Cache
    Radeon 9000 Pro 128mb
    MSI KT3 Ultra2 w/out Raid

    TwEaKist
    Attached Images Attached Images
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

  6. #51
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    .....sorry for inturrupting
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

  7. #52
    Ultimate Member
    Join Date
    Aug 2002
    Posts
    3,922
    Hey, dude... that is impressive!

    Think of it. 2.13GHz from a 1.73GHz chip. That's a 400MHz OC right there. Remember, some b cores do better than others. I have mine at 2.5, but remember I'm on water.

  8. #53
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    CPU Arith
    Attached Images Attached Images
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

  9. #54
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    CPU MM
    Attached Images Attached Images
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

  10. #55
    Ultimate Member Giblet Plus!'s Avatar
    Join Date
    May 2002
    Location
    Evanston, IL
    Posts
    2,821
    I just traded my pally XP2000 for an AIUGA XP1800. Since my board doesn't have a 1/5 divider (I learned this the hard way), I have to find a way to get a 15x or 16x multiplier unlocked.

    CV - If I had your XP2100, I'd be at at least 2.6ghz 24/7
    This is where my signature would go if I wasn't so lazy.

  11. #56
    Ultimate Member
    Join Date
    Aug 2002
    Posts
    3,922
    Well I've tried blasting cold air from outside, getting it down to 25-26 degrees under load. Won't do over 2.55, even though it posts at 2.68. 1.9v nothing. 2v nothing. 2.1v nothing. 2.2v doesn't help either. Seems the chip's mechanical limits are there and in order to go higher I'd need phase change cooling of some kind.

    I'm certain It's one of those CPUs that would do 3.3GHz under prometia

    And yes your H20 system might get mien down a few degrees C.

    BTW -- I expect 2GHz, no less with that XP 1800+ and your H20 system. If your board allows 2vcore, you can reach 2.2GHz no prob.

  12. #57
    Senior Member Grentarc's Avatar
    Join Date
    Feb 2002
    Location
    Wagga, NSW, Australia
    Posts
    759
    Just a quick question over here...
    what is the highest Vcore of the Abit NF7 (no raid or that stuff... budget system for a friend.. ) using XP 2600+ (333)

    will get you benchmarks of the system this week... (only got GF4 Ti4800... not going to be too great )

    edit: parts will be in within a few days hopefully!...
    Last edited by Grentarc; 02-23-2003 at 03:00 AM.

  13. #58
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    my temps are pretty nice considering i dont have water EVERYTHING is on air 28c for cpu and 22c for case freezin inside my case lol not really but still
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

  14. #59
    Senior Member TiGgErDbC's Avatar
    Join Date
    Dec 2001
    Location
    BC
    Posts
    677
    well my xp 1700+ is running at 2.09 mhz temp 31C idle 35C load and thats on air... and one case fan

    +5% volts for cpu and the ram is the only thing holding the cpu back cause its only pc 2100 and i have it at 166...

    the tbread-b chips are amazing.... my steppng is JUBHA i belive :\

  15. #60
    Member XtReAmTwEaKist's Avatar
    Join Date
    Nov 2001
    Location
    Minneapolis
    Posts
    408
    The wire trick doesnt work i've jus got done doing it and undoing it lieing bastids i want to use my multipliers! and yes it is factory unlocked but oh well i guess i have to toss down 200$ for a stick of 512 DDR400 jus to go higher or Vmod....... sounds......interesting

    Athlon XP 2100+ @ 2.13 (164X13)
    512Mb DDR333 (Crucial)
    80Gb WD 2Mb Cache
    Radeon 9000 Pro 128mb
    MSI KT3 Ultra 2

    Tweakist
    Athlon XP 2100+ @ 2.24 (178X12.5)
    512Mb DDR400 (Corsair)
    80Gb WD 8Mb Cache
    Radeon 9000 Pro 128mb DDR
    MSI KT3 Ultra 2
    SB Live! Value
    Intel NIC
    2 CD-RW 8x4x32 & 2x4x24 (im cheap)

    TwEaKist

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •