-
Member
Pls Help, PC won't post
Hi everybody,
I reallly need help with this one, it is quite urgent.
I installed a second HD to a friend's PC as a slave on the IDE2. The drive was known to have controller problems but we had to retrieve some data.
After powering the PC I heard continouus long beeps and the machine could not post.
Removed the forementioned HD but the PC would still not post, no sounds any more and would not turn off by the switch.
I cleared the CMOS and tried to turn it on again. Same results : no post.
My friend has to do some serious work tomorrow, so please help.
Many thanks in advance.
-
Ultimate Member
Make sure no cards or wires are loose, and that the mouse and keyboard wires are not switched. Make sure the ram is tight too.
Improvise - Adapt - Overcome
SafeSearch is off
-
Ultimate Member
RAM!!
the RAM is loose
unplug and reinstall
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|