-
I installed new HD...how do i put a OS on it?
I want to put my OS on the new HD then reformat my old drive and get rid of all errors and then install OS back. I am guessing this is the best thing to do. The old HD is 30 Gb and new one is 10 GB........Am I approaching this right?
-
Ultimate Member
-
Ultimate Member
install both drives and then start the computer with a boot disk. Then reformat the old drive and then fdisk and format the new drive. Then boot the system up with the OS cd in the tray and install it.
-
Stark Raving MOD
so you want to put in the 10gb, install the os, transfer files from the 30 to the 10, then blow out the 30 and copy the 10gb back to the 30gb. is that right?
what os are you using? installation will vary depending on the os.
-
Ultimate Member
Re: I installed new HD...how do i put a OS on it?
-
My original HD which is the 30 GB has several errors and lots of stuff I dont want on my HD so I installed a 10 GB HD and would like to put my OS on there so I dont completley lose operation of the PC in case I screw something up. I think both drives are 5400. I enjoy playing games and downloading movies and music. So is it better to keep the OS on the smaller HD?
-
-
Is there a big differeance with format and fdisk
-
Stark Raving MOD
you should put your os on the larger drive, since the platters probably are of higher density than the 10GB drive.
I'm guessing that you only have 1 partition on the 30 and you don't want to reformat it.
you want to make sure that you don't accidentally format your 30gb drive. I would disconnect it entirely, then load your OS onto the 10. reattach the 30 and transfer whatever you need to the 10. reformat the 30, then copy the entire 10gb drive back to the 30 using drive image or maxblast.
-
Stark Raving MOD
fdisk creates the partition
format prepares the partition for data
-
so best is disconnect my 30...so i dont screw it up........
then do I just boot the PC and have the 98se cd in and go through the install
then attach the 30 gb and reformat everything and then just copy the 10gb to the 30gb and then I am in business?
-
Stark Raving MOD
for win98, i usually copy the win98 folder from the cd to the hdd. you can copy just the .cab files, but i just dump the whole win98 folder.
boot from a win98 floppy. then follow these commands
c:
md win98
d: (or whatever your cdrom drive letter is)
cd win98
dir (just to make sure the cdrom is detected properly)
copy *.* c:\win98
go to c:\win98 and run setup. This is a good way to do it, since you'll never have to put the win98 cd in everytime you change settings.
-
Stark Raving MOD
are you trying to save data from the 30gb or not? if not, then heck with it and format the **** thing. hehe I was under the impression that you wanted to save data on the 30gb drive before you blew it out.
-
I can just reinstall all the stuff I want.........Or is it tough to keep some of the stuff?
-
Stark Raving MOD
that's a personal call. You're gonna have to reload all your programs anyway. If you don't need to save any documents, etc. then just format the sucker.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|