CPU / Motherboard Bug NEED HELP and TIPS

[nekrofilliak]

That the Story

i have 3 computer ...see bottom

Stept
1 - My duron (computer 1) is not booting ( blank Screen )
2 , i try my athlon ( computer 2 cpu ) on the computer 1 boars nothing happen .. not booting ( blank screen )
3 i reput my athlon cpu (computer 2 cpu) on the computer 2 board , not booting
4 i try the athlon (computer 2 cpu)on the computer 3 board, not booting
5 , i reput the computer 3 cpu on the computer 3 board , not booting :-)

6 , i buy a new cpu then it wok on all 3 boards

what it happen to all 3 cpu ?

computer 1
Duron 1ghz
Board Soyo
256 SDRAM PC133

Computer2
Athlon 1.8+
Board Epox
512 DDR 2100

Computer3
Athlon 1.7+
Board Gygabyte
256 DDR 2100

[AllGamer]

sorry, but those 3 CPUs seems to be DEAD then.

not exactely know how or why.

did you put the headsink and FAn on each of those cases?

[RampageIII]

Power Surge?

[nekrofilliak]

that a answer but why it only burn the cpu , then the cpu test was separated by about 1 hour , , then before each test the original cpu was working

[Jsnyderj]

When was the last time your other 2 bords were working... Me personally if i had 2 working computers and one non working computer .. I would not dismantle the other 2 working computers to test a nonworking one.

What was the new CPU u bought to test that works in all 3 bords ?

Did any of the 3 processors ever over heat on you at any point in time?..

It sounds odd but ... I think you have to buy a total of 3 new processors ..

Buy exactily the same as you did that you tested in all 3 bords .. that worked .. Problem solved that way ..

If you really Want to test if the other processors are dead though .. You can send them to me and I can run them through a test machine. It will tell you how they died if they are dead... ( just a thought ) .

It could also be a MB or Jumber Setting wrong.

Who knows ..

[nekrofilliak]

before all of this
all 3 cpu was working flawless on all tree board
all tree board where set up at auto setup for cpu clock and cpu voltage ,
i have already try to reset all board bios nothing more

[AllGamer]

hmm.... Jumpers on an Athlon mobo, it's kinda a rare breed.

99% of AMD mobos are BIOS based or at worst Dib switches.

only very early models had Jumpers for clock.

[Jsnyderj]

Originally posted by AllGamer
hmm.... Jumpers on an Athlon mobo, it's kinda a rare breed.

99% of AMD mobos are BIOS based or at worst Dib switches.

only very early models had Jumpers for clock.

Sorry ment to say softmenu .. I have many bord s that take amd processors... I was working on a old P133 mobo when i was typing that .. Power of suggestion LOL.

One thing though that could have happened is if your core voltage was set to high on one mobo and you put all 3 processors into the same mobo you could have burnt them out. what were you trying to do in the first place to make you switch processors from one mobo to the other mobo .