-
Memory over 1GB?
My friends PC will not except 2x512MB of DDR ram(both sticks are fine)it will except anything under 1GB but nothing over. The web site says it should except up to 3GB
Gigabyte GA-&DXR+ Win XP
Thanks.
-
Senior Member
MEMORY (DDR)
Supports up to 3GB DDR SDRAM (2GB unbrffered memory)
2.5V/2.7V/2.9V DDR Memory voltage adjustable
3 DIMMs of 184-pin DDR sockets
Supports either PC1600/DDR200 or PC2100/DDR266 DDR memory
Supports 72bits ECC type DRAM integrity mode
This is what mentioned in the Gigabyte website concerning the
GA-7DXR+.
-
Senior Member
what kind of RAM are you using?
-
Wait for it.....................
................. Crucial Memory and Strait from Crucials Memory selector for the GA-7DXR+
DDR PC2100 • CL=2.5 • Registered • ECC • 7.5ns • 2.5V • 64Meg x 72
Hope this helps
Ian
-
Senior Member
Those are number one RAM . Try to load setup and CMOS default in the bios ,save and restart.
-
Member
Maybe you should update to the latest bios for the board. If the bios is old it may only support 1 Gig.
Things that make you go HMMMMMM...
-
Ultimate Member
Why on earth do you use ECC/Reg on a board that does not support it? It's more expensive, a tad slower and may cause problems on the VIA chipset. If you bought from Crucial you should have used your memory selector tools and it would never come up with the ECC/Reg modules.
As for your problem, how are you trying to add the extra memory?
Do you have 2x 512 and you add another stick? or you replace a 512MB stick with a larger one?
Is it the BIOS that does not see the RAM or the OS?
Do all sticks (try one by one) work in all slots?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|