Search:
Type: Posts; User: missiveusa
Search:
Search took 0.93 seconds.
-
Definitely go with the 965 chipset for Conroe CPU. If cost is an issue, the Foxconn P9657AA is a great P965-based board:
http://www.newegg.com/Product/Product.asp?Item=N82E16813186102
-
The beeping noise you hear is the BIOS beep code telling you what the problem is. Follow Midkynte's advice and change out one component at a time and reboot Windows. Use latest drivers from...
-
The Portreporter program takes some moves to install and run after you extrtact tyhe .zip files:
http://support.microsoft.com/kb/837243
-
Try this little app from M'soft to track down the culprit:
http://www.microsoft.com/downloads/details.aspx?familyid=69ba779b-bae9-4243-b9d6-63e62b4bcd2e&displaylang=en
You might also try...
-
The new version of iTunes (7.0) is pretty buggy, lots of folks reporting problems with it. My install wouldn't play tracks, all I got was a lot of static. Solution was to go into Quicktime and turn...
-
Common set up for two IDE devices is to put both on IDE 1, with HDD as MASTER and the optical drive as SLAVE on the same EIDE cable and jumpers set accordingly. Sounds like you've tried every combo...
-
I'm not familiar with AIM Phoneline, but I've installed and configured Skype, another VoIP program. IIRC Skype configures mic volume control with Mute box checked in Control Panel/ Sounds & Audio/...
-
Six standoffs for an ATX motherboard? Not likely. Use the correct threaded screws for ALL the standoffs. ATX board will have at least 9. If you're not installing all the brass standoffs in the...
-
Either move the CMOS jumper over one pin to "clear", then back to normal setting, or remove the battery for 10-15 minutes. The way I usually nail down the culprit hardware is by elimination: plug in...
-
Does the board have ports for both platforms, or is video onboard? Reset CMOS, then make sure BIOS settings for video output are correct.
|
|