-
PC Parts
I have some parts for sale or trade. Not the greatest stuff but...
Voodoo3 2000 Card In box with original Driver CD and WinDVD $30.00
Generic TNT2 M64 32Meg Card - $20 Bucks (Sold)
Pentium 200MMX CPU $10 (Sold)
3dCool Athlon Freezer Pro Slot A HSF $20
Alpha P612M60 Slot A Heat Sink No Fans $30
Intenal Zip 100 Drive $10
5 Port 10Mb/Sec D-Link Hub
Generic ISA 16Bit Sound Card - $5
Generic PC133 7NS CL3 128MB (Have 2) -$20 Each (Both Sold)
Generic Slot1 Mainboard Jumperless LX Chipset AGPSlot - $10(SOLD)
Generic Dual Slot1 LX Mainboard AGP Slot (Requires Apic Module to run in SMP Mode) - $10
Am intrested in selling, or trding. Trades I', looking for Mod stuff like 92, and 120mm, and a 160mm fans with Chrome Guards, 80MM, 92MM, And 120MM Whole Saw with Mandrell in good shape. Also looking for Athlon MB Abit KG7, Epox 8KHA+, or similar DDR Board, MSI KT266 Pro DDR, or Similar DDR KT 266, and KT266A Mother Boards with adjustible Multiplier, DDR Mem Modules, etc...
If you have the above mentioned Motherboards I will trade the parts, and somecash to you for it.
I can be emailed At:
quigonsean@yahoo.com
Thanks,
Sean Ward
Last edited by quigonsean; 02-07-2002 at 12:20 AM.
-
Hi, I'm interested in the voodoo3 card and the generic p133 mem
I'm a lil new but is the voodoo an AGP card?
-
Member
I'll take that Zip Drive off your hands
-
Senior Member
Generic TNT2 M64 32Meg Card - $20 Bucks
is it AGP? and if so, 2x ?
if so, E me about it and I'll take it.
Madfish
Edit: do you still have the drivers for it also? and fill me in more on this Generic Slot1 Mainboard Jumperless LX Chipset AGPSlot - $10, looking for a home for my spare P-II 350 for DCing
my heat nick is madfish
www.heatware.com
Last edited by madfish; 01-31-2002 at 06:23 PM.
-
DNA_level_c7 - I sold the Memory at a computer show this weekend actually traded it in with cash for some cas2 Micron. The Voodoo3 2000 I still have, and it is an AGP Card. You can reach me at quigonsean@yahoo.com
MadFish - It does AGP 4X, and 2X. Istill have the Origanal Driver Disc, but I would recomend using the Detonator Drivers off www.nvidia.com
As for the Slot1 Board- It is an LX Chipset so I doubt it'll Oc. I never used it. I bought a Celeron 300a at a pc show when theyt came out, and it didn't work in the board I had, o I ran up to the show the next day and found a cheap slot1 board the vendow said it would work with celeron. It didn't, I did plug my freinds PII 233 in it to make sure the board was okay, and it worked fine, but it didn;t like my celeron, so I never used it ever I don't know much about it honestly. You can email me at quigonsean@yahoo.com
Ritalin Kid- Just email me at quigonsean@yahoo.com
Thanks All,
Sean Ward
quigonsean@yahoo.com
-
Senior Member
quigonsean: hold that mainboard and vid card for me, I'll E you this Sat. about funds..
Madfish
Oh btw, I don't want to OC it, just as long as it runs a P-II 350 for DCing ECCP
-
Senior Member
YO! ya got an E heading ya way.
Madfish
-
Senior Member
MO on it's way...
Bump too ^^^^^
Madfish
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|