-
Any GTU experts here?
With these settings i get 3650 using the 3DMark2001 test.
Seems low for my system....
Looking for Best settings for GTU3-1-1 and my system.
Current GTU Settings:
1. System:
X 16 Bits/Pixel Screen Resolution =1280x1024
X AGP Transfer Rate = Auto (1x)
X Compatability mode = Intel
2. OPENGL:
X Enable fast linear-mipmap-linear filtering
X force multi-texturing
X Buffer Region Extension
X Duel planes use video memory
X Enable triple-buffering
X Buffer flipping mode = auto
X Texture pre-cache
X Texture direct load
3. DirectX:
X level of anisotropy
X mipmap detail (14)
X Enable Z-buffer compression
X Texel alignment (7)
X Render no more than 3 frames ahead
X Enable user mipmaps
X Enable video texturing
4. GTU Settings:
X Use driver version specific interface
5. My System:
Windows ME
Gateway Performance 1400 PC (1.4gHTz), (Chipset: D850GB)
1 GIG RDRAM PC800 Memory
32MB Nvidia (ELSA) GeForce2 DDR, GTS Card
SB Live Gamer Sound Card
19" Monitor
Any suggestions welcome and appreciated,
Thank You,
-
Member
I've never had much luck with GTU. I always end up reinstalling the drivers and on a few occasions rebuilding my hard drive.
You can slow a G3Ti500 this low with all the good visual options turned on.
Anyway, to increase your score, you need to turn of the options that will make the GPU work harder.
Disable Anisotropy and Triple buffering and change AGP to 2x or 4x if the card will support it.
You might also check to see that VSYNC and Antialiasing are disabled.
There are others, but try these and see what happens.
Good Luck!
-
Thank you, Jimstep!
that gave me a few more FPS (the Vsync was off).
Took ur advice and did those other 3 things. So,
in 1 flight (CFS2) i went from a low of 8-FPS to 21-FPS.
Hard to tell in IL-2 (impossible!).
I'm off to a good start.
Appreciate it,
-
Member
The score you have is just right for your Geforce 2 GTS, I have a 64Mb geforce 2 PRO, and I only get 4300, which when you check on the website is a good score for the card, so I dont think you will get too much more out of your card, sorry.
-
Evil Lurks
Download RivaTuner and use "High Performance" preset. You should notice some difference, RivaTuner might look "less tweaker" to you, but it doesn't have "fake" keys, or keys that don't change anything.
Last edited by ND; 01-15-2002 at 09:00 PM.
-
Thanks ND!
I'll give it a shot. Will post differences here.
thanks again,
-
does anyone know where to find older versions of GTU? not the 3.1.1. , the new GTU doesn't work with my 23.11 drivers (win 2K)and I didn't back up the old version
-
DL'ed Rivatuner - version 2.
Didnt see any "High performance" settinganywhere.
So i took a shot and then ran the 3dmark2001 test.
The score dropped about 70 points (3588). What am i doing wrong??
thanks for input,
-
Its simple:GF2 is not Capable of DX8 Funktions.So if u want to Bench ur Card corectly you ll have to use 3dMark2000, coze this one is build for DX7 Cards.On GF2/Radeon256 and 7XXX Series DX8 Functions are only Emulated via drivers, so mainly ur CPU has to do all the work.
-
well, that puts a different light on things, don't it.
thanks,
-
Actually, i found NVmax the best. Has a good help and no need to reboot your system after making changes.
Still need to run it through the 3dmark program tho.
-
Evil Lurks
Its simple:GF2 is not Capable of DX8 Funktions.So if u want to Bench ur Card corectly you ll have to use 3dMark2000, coze this one is build for DX7 Cards
So what ?!
"Benchmark" is always a "Benchmark", and it doesn't matter which functions are emulated ...
As for your problem, savagkc :
1. Start RivaTuner.
2. Go to "Power User" tab.
3. Click on Forth icon from the Left, this one with "+" over the "folder".
4. Go to "Presets" directory.
5. Choose your OS (would be "W9X" for your WinME).
6. Choose "High Performance" preset.
Restart the Windows as asked
Post back here the new scores, please ...
-
ND, Thanks, will do that. Probably get new scores up in the AM (its 21:20 here and a great (old) Scifi flick is starting).
Appricate the help, later,
-
PowerUser score = 3500 (even).
Using it i dropped about 180 points. I know thats not much.
Looks like its about all i'll get until i get the GF3 card.
Thanks for all your help!
-
Originally posted by ND
So what ?!
"Benchmark" is always a "Benchmark", and it doesn't matter which functions are emulated ...
As for your problem, savagkc :
1. Start RivaTuner.
2. Go to "Power User" tab.
3. Click on Forth icon from the Left, this one with "+" over the "folder".
4. Go to "Presets" directory.
5. Choose your OS (would be "W9X" for your WinME).
6. Choose "High Performance" preset.
Restart the Windows as asked
Post back here the new scores, please ...
THATS SIMPLY WRONG
If i want to Bench my Graka, ill only be able to Bench it corectly if i ll let my Graka do the Work and not by lettin my CPU doin the work, aint i???A Benchmark is ay Benchmark????NOPE TOTALLY WRONG AGAIN.Some are for OGL Benches,Some for Pixel/Vertex Benching,Some for DX7Card,Some for TileBasedRendering and so on.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|