Results 1 to 4 of 4

Thread: AMD-Si-Soft Concern

  1. 10-09-2001, 05:44 PM #1
    alfafool
    Guest

    AMD-Si-Soft Concern

    I recently put together an AMD system - 1.4ghz, 830lmr (I know PcChips - I was on a budget) The system runs fine and benchmarks at the top end, however Si-Soft warns the chipset isn't designed to handle the FSB at 133, if I lower the FSB the system reports the chip at 650mhz. Any thoughts, should I be concerned? Temp seems stable around 77 F or so. 256Mb DDR
    (wasn't sure which forum was most appropriate)
    Reply With Quote Reply With Quote
  2. 10-09-2001, 08:23 PM #2
    JohnE.
    JohnE. is offline
    Member
    Join Date
    Sep 2001
    Location
    Vancouver, BC Canada
    Posts
    60
    Went to PCchips site, didn't see any model 830lmr. Closest I found was M830LR.

    If your board IS the M830LR the problem is that the FSB is TOO LOW not TOO HIGH. The M830LR supports AMD K7 Athlon/Duron 500M~1.4GHz CPUs with bus frequency at 200/266MHz.

    Hope this helps.

    JE
    But, it goes to 11
    Reply With Quote Reply With Quote
  3. 10-09-2001, 09:07 PM #3
    Potlicker
    Potlicker is offline
    Member Potlicker's Avatar
    Join Date
    Aug 2001
    Location
    Obetz, Ohio , USA
    Posts
    163
    Don't worry, see your post in benchmarking post.
    Reply With Quote Reply With Quote
  4. 10-09-2001, 09:53 PM #4
    Nighthawk
    Nighthawk is offline
    Senior Member Nighthawk's Avatar
    Join Date
    Jan 2001
    Location
    Univ. of Wash. Seattle, WA
    Posts
    580
    You are only supposed to post in one forum. Your post in Benchmarking is the correct one, and the others shouldn't have been created. Read the forum rules, please.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules