-
04-17-2004, 02:50 PM
#1366
Senior Member
Originally posted by AdamST
I don't know how to overclock the CPU or Ram. I'll i have ever done was overlock the card (i got it to 415/370). I use the stock Fan/heatstick on my CPU. I would be afraid i would screw it up.
There are a lot of oc-guides here, including stability testing. Just use the search function. I think I also posted one some time ago, but I dont have the text stored in a file on my HDD, and I wont write it again, but if I find it, I will post you a link.
-
04-17-2004, 02:50 PM
#1367
Moving up to 133Mhz or 166Mhz FSB would give a rather healthy boost in performance.
A common practice amongst AMD users who dont overclock is to lower the multiplier and raise the FSB, as such they dont overclock the CPU but recieve a very healthy boost to the RAM performance.
--Jakk
-
04-17-2004, 03:01 PM
#1368
Member
Ok i will do a little searching. Oh and my 3Dmark2001 was with 415/370 but that was my 3Dmark03 score with stock settings. With 415/370 i got 5743. Anyways ill check out google and the search on this forum and report back.
[Edit]
Well i looked at a few sites. I get what i need to do by not how. As far as voltage goes andf stuff like that. Like would i do it like a video card, up the FSB a little at a time. Or take it right to 133 from 100. Also about the voltage, is the a % i need to take it up for every Mhz of FSB speed.
Also it a Northwood NOT prescott
[Edit]
CPU-Z also calls it a Northwood
I overclocked it to 2600Mhz. and ram is OC'd to PC2300. Becasue of my motherboard i cant overclock to my own chosing. it is quit strange.
Last edited by AdamST; 04-17-2004 at 10:09 PM.
-
04-18-2004, 05:03 PM
#1369
XP 2500+ @ 2596mhz (236*11)
Abit NF7-s
2 x 512 XMS ProSeries twinx matched module pair.
seagate 160gb + seagate 120 SATA150 drive
Ati 9800Pro overclocked like a demon
Antec Trueblue 480Watt PSU
got 23,560 last weekend.
Duron1000 @ 1330Mhz
Aopen Mk33 board
128Mb Pc133 SD-RAM (some **** brand)
WD20GB + Seagate 40GB
Geforce 4 MX 440 8XAGP (not that the board supports that, did have a geforce 2 mx-200 but that died after nealy 3 years)
4,127 is the best so far.
Mate's AMD 3D @ like 66mhz
16MB pc 100
trident blade 8mb video card
2.3Gb god knows what HDD
Heaps of processors running (spyware & what not)
65 is the worst.....67 the best
-
04-18-2004, 05:17 PM
#1370
Senior Member
Originally posted by antec
Heaps of processors running (spyware & what not)
You also should know, taht on a slow CPU everything stresses the CPU more. I once had a Pentium 200MHz, first w/ Win95, later w/ Win98. I think I never had less than 5% CPU utilisation according to sysmon, even when only sysmon, explorer and systray were running. When only these apps were running, it was between 5% and 25%.
-
05-16-2004, 11:11 AM
#1371
3D Mark 2001se 12,160 with GA NForce 400 ultra Pro M/Board DDR
768 M/B Kingston Ram 2700
Triplex G4-Ti 4600 x 128M/B NVidia card at
mem 648MHz
core 338MHz
1024 x 768 at 85hertz refreshrate
XP2700+ 167 fsb 13x 2170 MHz
I dont know why the score is so low, I have benchmarked it with 3D Mark 2003
with the fsb at 200 and multiplier at x12 but the score was hardly different from default , the only setting not default in this test was the multiplier which was 13x.
Default is 12.5x
-
05-16-2004, 12:03 PM
#1372
Senior Member
Werz... I don't think that was a bad score with a TI 4600... a lot of people with higher, had to do some drastic cooling to their CPU and Video Card. The 4600 tends to run hot.
Rig 1, MSI K9A2 Platinum, 6400 Blackie, 2 X 2048 AData, MSI 3870; Rig 2, MSI K9A2 CF, 5000 Blackie, 2 X 1024 Patriot PC6400, ATI X1900 XT, Rig 3, Abit AN8 Fatal1ty, Opteron 185, 2 X 1024 Corsair PC3200C2PT ATI X1950 XTX Rig 4 Abit UL8 3800 X850 Pro
-
05-16-2004, 05:19 PM
#1373
Senior Member
be sure, that vsync, anti aliasing and anisotropic filtering is disabled.
-
05-18-2004, 03:43 AM
#1374
I increased the fsb to 170
and the multiplier to x14 = 2380Mhz
now 3D Mark 2001se score is 11899
it runs smoothly but slower,
the options in BIOS for AGP are auto or x4
I turned everything of in the GForce 4 ti 4600 properties in Display.except image performance was set on high.
AF = off
AS = off
AV = off should I leave the cpu settings alone and only increase the mem and core settings in the video card?
in the 3D Mark2001se details it says...
Rate.
rev 2.0
1x, 2x
4x, (4x enabled) so I'm not sure if the AGP setting was off or not, anyway I think I'll return to default fsb and multiplier with the AS set on 4x, the max the card will go and put the system back to Quality, as the difference in fps is minimal but in visual quality is noticeable enough to make even the Benchmark tests look better.
Thanks for your help.
werz
-
05-18-2004, 12:46 PM
#1375
Senior Member
what about vsync? ius ita lso off?
-
05-18-2004, 04:41 PM
#1376
Ultimate Member
About at the top for this system:
19,418
Abit NF7-S 2.0 Mobo
AMD 3200 XP @ 12.5*200 Vantec Aeroflow
ATi 9800 Pro @ 444/756 Arctic Silencer
http://service.futuremark.com/servle...jectId=7841829
-
05-19-2004, 01:03 AM
#1377
v sync was off to, I'll try again after I next do a format, then I'll be sure its as lean as possible, it's been a while and could have something I cant find holding it back, also will experiment with v'card settings, I saw a program which lets me adjust them 10% at a time, I'm just not sure if it's on this h/d as I disconnected one the other day.
-
05-20-2004, 06:33 AM
#1378
Hi
Im pretty new to this stuff and to save creating a new thread, where can i download the benchmark software????
How do i do it?
Sorry about my ignorance
Thanks
-
05-20-2004, 06:42 AM
#1379
d/w! Found it! sorry! will have my results up sharpish!
-
05-21-2004, 12:26 AM
#1380
how do I change the ram settings?
at the moment in AIDA32 they show
2.5-3-3-7. I cant be certain but I think I saw them before at. 2-2-2-7 could that be right? and is there a way to adjust these values, in the bios I can change the dim voltages, what should I change them to or by how much should I increase the voltage?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|