POST YOUR 3DMARK2001 SCORES!!!!

[morpheus kain]

Your definitely welcome NOHTO, and Give that Radeon HELL !!!

[Grentarc]

11,513 3DMarks

KT133a chipset
165MHz FSB
All air

- had to remove my 256mb DIMM and just keep the 512mb (7ns), although the 256 mb one is rated at 6ns.. so it should be PC-166... but it is CL3 @ 133, while the 512mb is CL2 @ 133... meanwhile i kept all the ram at its tightest settings........
/me is veeerrrry happy now

[causticVapor]

That's awesome. You know what the scary thing is? I've been able to post a crappy DFI board all the way up to 166FSB (BIOS doesn't have any higher numbers ) with CL3 PC133 mem!

Of course, getting into windows is another thing, no voltage options... and now with the stupd savage2k card it'll go no higher than 155

[Grentarc]

just topped that score by another 99 points.
11,612 3DMarks
used the latest VIA Hyperion drivers.... bit faster...
CV: I have had this board post on a 173MHz FSB... but HDD corruption held me back. Highest I can get into windows is 166FSB, but 3DMark isnt stable... but i am working on that!
[EDIT: fixed typo's ]

[Grentarc]

I think it may be time to make this thread a sticky, so people will be encouraged to post in here ratehr than posting another "Is this a good score" thread.
how bout it mods?

[causticVapor]

Sounds good to me. There should be stickys for every major benchmark app like 3dmark, sysmark, pcmark, sandra, zd winbench, etc.

But under one circumstance: All thread-crapping-attempt posts will be deleted.


BTW Grentarc do you know about any vmods for the DFI Ca-63 SC? I'd really like to push that PIII up to 913 (@ 166FSB) and the mem to really low timings. I'm all jumpy after the successful round on the 8-kHA+ with a 25-watt iron

[Grentarc]

Just what i was thinking.

Just discovered.. #10 1901 MHz CPU w/ GF4 Ti4200 on the ORB.... and the 9 above me have DDR....

CV: do you know which one is the voltage regulator chip? if so, get the numbers off it and PM them to me, i will get the white papers for the chip and work out what resistance the multi turn pots should be.

[causticVapor]

Grentarc you have PM

[Shinichiro Ota]

I would like to get an nForce 2 motherboard, but I would like your opinions first. Should I buy one from EPoX, ASUS, or ABIT? Your suggestions would be appreciated.

[morpheus kain]

Shinichro make a new thread in the motherboard forum and we will all be more than happy to help you.

[Grentarc]

11,650 3DMarks - Full test

166 FSB... #1 SDRAM/AMD/Ti4200 on the ORB
#7 1.914GHz / Ti4200
i am pleased.

[morpheus kain]

Good work Grenatarc!

[causticVapor]

Eh good work there Grentarc! SDRAM power hehe.

You might be able to push 175FSB if you laxen the timings. I've been able to do it on another board... you can try as well... 1500 MB/s in sandra

A hit unless the BIOS only allows 166 FSB

[Bigjakkstaffa]

Nah - i think its a kt7 he's running which goes to 155 and then allows you tyo go up in 1mhz increments another 28FSb or sumink

--Jakk

[Giblet Plus!]

Beat you both with my palimino, ti4200 and winME!



http://service.futuremark.com/compare?2k1=5480282

12,034

The new 4 in 1s gave me 300 pts