-
12-09-2002, 09:12 PM
#706
Member
I got 941
HP Pavilion 6630
500 celeron
191 mB
PCI Geforce 2 MX200 (Drivers that camez int he boxs)
WIN 98SE,
Don't no if my score is any good. BUt i well be geting a new system that i well build..............
-
12-09-2002, 09:25 PM
#707
Senior Member
Go to www.driverheaven.net and look for better drivers they are out there.
My HP 6360 has onboard grafics and NO AGP slot, so it will not even run the 3D benchmark. Hey its workable for surfing, a good paperweight and even a conversation piece.
Good luck on your new machine!
Rig 1, MSI K9A2 Platinum, 6400 Blackie, 2 X 2048 AData, MSI 3870; Rig 2, MSI K9A2 CF, 5000 Blackie, 2 X 1024 Patriot PC6400, ATI X1900 XT, Rig 3, Abit AN8 Fatal1ty, Opteron 185, 2 X 1024 Corsair PC3200C2PT ATI X1950 XTX Rig 4 Abit UL8 3800 X850 Pro
-
12-10-2002, 12:00 AM
#708
Member
Hi gen_hideki,,, if I were to X out that mad onion screenie would I see diamond head????????
asus p3c-2000
P-II 400-100fsb
320 mb pc133 sdram
windows xp
4x agp ecs-ag315T
(building new system, someday, soon I hope)
-
12-11-2002, 10:59 PM
#709
Biostar M7VKD
Athlon XP 1600+
512 MB PC133
Geforce2 MX 100/200 64MB
WinXP
Score: 1579
-
12-12-2002, 05:42 PM
#710
I got pie!!!
maje87c
You should be around 3200 with your set up. Try using 23.11 drivers to see if can improve your score.
Life is a bowl of cherries
-
12-12-2002, 11:26 PM
#711
-
12-12-2002, 11:30 PM
#712
Ultimate Member
Right here. If this doesn't take you straight to the dl page, just find the nVidia drivers page and find any dang driver yer heart desires! .
-
12-13-2002, 05:43 AM
#713
Ultimate Member
http://service.futuremark.com/compare?2k1=5315592
My latest with the new Thermaltake Spark 7 HSF
I'm running the fan at 1/2 speed (nice and quiet) and it still cools better than any other of the HSF's I've tried. Though I will admit, MSI does have a problem with there temp. reading on there boards. With the Thermal Sensor attached under the Heatsink next to the CPU *using it to determine the Fan speed / Heat* the Bios shows 43c while the Sensor obviously thinks it's much cooler because it sets the fan to about 1800RPM's......
-
12-15-2002, 09:35 AM
#714
Well, here are my latest scores. I've included some other benches in the pic so you can look in there as well. This is my first stride into the 166FSB world; the CPU came unlocked
Drivers -- 40.72
Koolance Watercooling
EPoX 8-KHA+
AMD Athlon XP T-bred A 1800+ 1.53GHz @ 1.83GHz (1.65vcore, 166*11)
2x CL2.5 PC2100 DIMMs, Kingston and Samsung:
- CL2.5
333MHz
2-6-2
1.0 DRAM 0-1 timing
2T command rate
Continuous request - on
Fast R/W turnaround - on
voltage: 3.0v
PNY Ti 4200 64MB @ 293/621:
- AGP 4x enabled
83MHz AGP bus
1-WS R/W
Fast writes enabled
BTW I don't know why the pic says it's not run using the default settings, but, FYI It was at 0xAA, 0xAniso, Texture sharpening off, 24-bit buffer, 1024x768x16, vsync off.
Here's the link to FutureMark:
We are Go houston
Last edited by causticVapor; 12-15-2002 at 09:40 AM.
-
12-15-2002, 09:37 AM
#715
-
12-15-2002, 10:08 AM
#716
I think I'll be able to overclock my CPU even more with an nForce 2 mobo (8RDA+) and two 100 GB HDDs, both from WD and have 8 MB of ca$h Try to shoot for 166 FSB.
!! BONZAI !!
-
12-15-2002, 10:38 AM
#717
Your cooling system and CPU are the limits, not the mobo.
-
12-16-2002, 03:21 PM
#718
Originally posted by Gen_Hideki_Tojo
Here you go, fellows. (I love to benchmark my system over and over again. I hope you don't mind. )
Link to futuremark plz
(I love to benchmark my system over and over again. I hope you don't mind. ) [/B]
-
12-16-2002, 03:58 PM
#719
I got pie!!!
What is the 3d benchmark for linux operating systems, anyone?
Life is a bowl of cherries
-
12-16-2002, 04:03 PM
#720
Probably some open gl bench as linux canne use DX
--Jakk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|