POST YOUR 3DMARK2001 SCORES!!!!

[tking]

Originally posted by tking
The Radeon hit almost 7000 and that was with old drivers.
Catalysts go in tonight and over 7000 I go!

... and a 175 increase with the new drivers brings me to 7060 3dmarks.

Now to start messing with the timing.

T

[Beeblequix]

<http://service.madonion.com/compare?2k1=3843362>

9578


Athlon XP 1700 +
A7V266-E optimal bios settings
MSI Geforce 4 ti 4200 64meg --this baby comes at faster default speeds than nvidia reference
256 ddr sdram 2-2-2-5
IBM 60GXP 40GB + POS 2GB c-g8 from the old packard hell
Lite On 12x10x32 cdrw
Tosiba 16/40 dvd/cdrom
yada yada yada...

My upgrade from G3ti200 to G4ti4200 resulted in an increase from ~7k to ~9.4k. The cost of doing this was ~$74USD, making this a pretty good price/performance deal.

ßeeßle Qµix

[michaelwest]

Compared to some of the people on the first page including the guy who started the thread my computer is way faster even with a low CPU.

It is
Celeron 300 MHz @ 374 MHz
176 MB Ram
Geforce 256 Video card

3dmark 2001 score (1155)

[But_Why]

that is a good score, is that at 1024x768x32 (standard settings)??

[michaelwest]

Yeah I have tried most resolutions and get around the same score each time.

The thing that is giving the good score (for an older computer) is the Geforce 256. This really is a good card for slower computers.

[Hammy1]

9774 with RADEON 8500 Retail,i should be happy.im not my radeon maxes out at 285/285 i know some go much higher.
and my Fsb is overclocked to 190x10,

[davidcarters33]

Epox 8K3A (DDR333)
Athlon XP2000 (1.66 GHz)
256Mb Corsair XMS3000- DDR RAM (clock 175MHz = 350MHz)
PNY Verto Geforce 4 Ti4600 128Mb
Benchmarked on 1024x768 32 bit

3DMark2001 SE score = 11158


beat that!
(without overclocking!)

[Martingi]

My specs:

Pentium 3 733@935 ( 5.5 x 170 FSB)
Asus TUSL2-C motherboard
leadtek Geforce 4 MX 400 64mb ddr ram (stock)
384 sdram (3 x 128)

3d mark 2001 (1024x768 32bit)
score= 4053

pretty happy with this score

[tking]

Originally posted by Hammy1
9774 with RADEON 8500 Retail,i should be happy.im not my radeon maxes out at 285/285 i know some go much higher.
and my Fsb is overclocked to 190x10,

I just pegged my 8500 at 300/300 for a test and it worked fine (stable for many hours of constant running). Could it be a heat issue in your case?

I'm thinking I can run it up to maybe 325 before more exotic cooling will be required (but then I'm running a non-o/clocked P4, so heat is less of an issue).

T

[Hammy1]

Originally posted by tking


I just pegged my 8500 at 300/300 for a test and it worked fine (stable for many hours of constant running). Could it be a heat issue in your case?

I'm thinking I can run it up to maybe 325 before more exotic cooling will be required (but then I'm running a non-o/clocked P4, so heat is less of an issue).

T

I wish it was heat ive modded it,its just a sh*t card for O/C.

[Witch-Talon]

Score of 997 With a Geforce TNT2 M64 Athlon xp 1900+ 256 pc2100 RAM Nothing overclocked

TOALLY SUCKS!!!

Coughs coughs plans to upgrade soon anyway

[Beeblequix]

Originally posted by Witch-Talon
Score of 997 With a Geforce TNT2 M64 Athlon xp 1900+ 256 pc2100 RAM Nothing overclocked

TOALLY SUCKS!!!

Coughs coughs plans to upgrade soon anyway

Uhhh.....hate to break this to you but there's no such thing as a Geforce TNT2 M64. Did you mean to say Nvidia TNT2 M64? I think so. I must say that you get the Most Obvious Bottleneck Award. Congratz.

ß.Qµix

[NOHTO]

13000 WITH AMD
13165 3D MARK 2001SE

ABIT AT7 MOBO
UNLOCKED XP 2200 2109MHZ
8 MAXTOR 20 GIG HD'S IN STRIPING 0 WITH NEW HIGHPOINT CONTROLER
GAINWARD 4600 GOLDENSAMPLE WATERCOOLED 335/775
CORSAIR 3200 512 XMS RAM
NEW GOTT REFRIGERATED WATERCOOLER COOLANT TEMP 15 DEGREES F.
PONDMASTER 500 GPH WATERPUMP

Just v-modded board and now it is time to do the old Konformal coating on the mohterboard and the volt mod on the gainward and then maybe I'll be able to keep up with those [*-deleted word-*] pentiums
(thats what AMD gets for slacking for so long now they have to play catch-up all over)

(*** Polite language only please *** - WSUA 3. a.)

[Grentarc]

thats not a bad overclock i might say.. 2.1GHz... 300MHz......

[Ammok]

Witch-talon, what youn doing witha tnt and a an Athlon 1900?

Take the vid card out and run 3d2001 again and you'll get a higher score.

C'mon, you really need to get an 8500 or G4 with that amount of power, sell the dog, wife children and get a decent card.

PS I think I might have a good deal on selling the missus and then i can get rid of my almost as bad G2mx400 with 3075 3d marks.