-
whoaaaa, new detonators rock!
i went from 3400
to 5800 for 3Dmarks2k.
i had 12.xx before
win2k with sp2
900MHz tbird
gigabyte 7zx-1
256mb micron pc133
32mb ddr geforce2pro
20gb 54000prm western digital
16x pioneer dvd
24x veloCD
Zip drive
-
Ultimate Member
Cool.! Where did you downloaded them?>??
-
well i have pro, but i think its heavily optimized for 2000/XP.
-
i'm running win 98se
1.2 t/bird
abit kt7a
256 ram
had the 12.xx in before put the new det in and 3dmark 2001 went from 5800 to 4000 odd so took em out again also
[This message has been edited by stu (edited 09-12-2001).]
-
Ultimate Member
DUUUUHHh!@!!!
I should have just tried Nvidia.com!!! 
I installed them and my card performed worst in Quake 3 and 3dmark so I installed 12.90 again.!
I think they are really optimized for the GF3!
-
Member
I have a Gforce3 and I saw a substantial increase, but I did notice if I overclocked my card, the results took a hit.
-
Ultimate Member
I run a
T'Bird 1400 @ 1500
256Mb DDR
40Gb ATA100 7200
Winfast Geforce III
Win Me
With Detonator III 3D Mark2001 runs @ 5693 in Default Mode
With Detonator IV it jumped to 6415 without o/c. I think det IV is definetly G3 optimised, to me it's like having a new card free of charge. nVidia rocks alright, they rock big time.
-
My card is behaving strangely with the new detonaters
P3 1ghz
256mb ram
phrophet II mx 64mb
etc...
i'm getting 10-15 fps faster in q3 but in 3dmark2001 i am now getting strange errors and connot complete the tests.
Hope they revise their drivers soon!
-
Strawbs: You are getting 6415?! I'm pretty sure (I'll have to double check though) that I'm using the latest Det drivers, but on my system, I'm only getting 4999 on 3DMark2001... here is my system:
Asus A7A266 Mobo
Athlon 1.4Ghz (Not overclocked right now)
512MB Crucial DDR
VisionTek GeForce3
Okay... so your chip is oc'd, but it doesn't seem to me that 100mhz is going to unleash 1415 more marks on a similar system. I know the VisionTek generally benches lower than most GeForce3s, but still..
-Jim
-
Ultimate Member
I ran it today without any o/c (@1400Mhz) and scored 6600 exactly, When I o/c the card it scored 7813, are you running Win Me or 98? . The blurb at nVidia says the drivers are Opt for win XP, so it could be that 98 is just that little too long in the tooth. Make sure you have DX8.0a as DX 8.0 is flawed. you could also try taking a stick of ram out (if you have 2) and testing with 256mb, I've heard that too much ram can cause problems with this board, otherwise it may be your card has too many changes from nVidia spec for the drivers to have any drastic effect. Interesting problem though. I've just remembered one other thing that may make a difference, Although we have the same Mobo, I've udated my bios to v. aa261006. Have You? available on the asus wed site. Best of Luck
Strawbs
Last edited by Strawbs; 09-20-2001 at 06:21 PM.
-
I just downloaded and installed the new detonator 4 drivers, and removed them for the 12.90 about 5 minutes later. I didn't benchmark it using 3dmark2k1, but I did use UT to test it. I'm getting about 10fps less with the new drivers than I was with the 12.90.
What I noticed was that the FPS was very erratic with the new detonators, when there was no action going on, it would occassionally spike to 80fps, but it would usually stay in the mid 70's, but as soon as there was some shooting going on it dropped to 58fps, and at times much lower for just about half a second or so. With my 12.90's I never get below 65fps, normally i'm in the high 60's low 70's... Again, with an occassional spike into the 80's. I'm using a GF2MX400 64MB and running UT in 1024x768x32.
-Ramon
-
Ultimate Member
OK, the proof is usually in the eating, I've copied my best score from MadOnion, The card ain't clocked!!
Your 3DMark2001 Results in Detail
Project Name Top Marks
Operating System Microsoft Windows ME
DirectX Version 8.00
Mobo Manufacturer ASUSTeK Computer INC.
Mobo Model A7A266
CPU AMD Athlon(tm) Processor 1500 Mhz
FSB 142 MHz
3D Accelerator NVIDIA GeForce3
Graphics Chipset NVIDIA GeForce3
Driver Version 4.13.01.2181
Video Memory 64 MB
Resolution 1024x768 32bit
Texture Format Compressed
FSAA Disabled
Z-Buffer Depth 24bit
Frame Buffer Double
Rendering Pipeline D3D Pure Hardware T&L
3DMark Result 6873 3D marks
Game 1 Car Chase - Low Detail 108.4 FPS
Game 1 Car Chase - High Detail 39.9 FPS
Game 2 Dragothic - Low Detail 105.5 FPS
Game 2 Dragothic - High Detail 55.7 FPS
Game 3 Lobby - Low Detail 107.8 FPS
Game 3 Lobby - High Detail 49.9 FPS
Game 4 Nature 37.0 FPS
Fill Rate (Single-Texturing) 741.3 MTexels/s
Fill Rate (Multi-Texturing) 1458.1 MTexels/s
High Polygon Count (1 light) 17.2 MTriangles/s
High Polygon Count (8 lights) 3.4 MTriangles/s
Environment Bump Mapping 86.7 FPS
DOT3 Bump Mapping 130.6 FPS
Vertex Shader Speed 48.4 FPS
Pixel Shader Speed 88.1 FPS
Point Sprite Speed 16.3 MSprites/s
Published Yes
Read em and weep.
-
Read this and weap now we can play a good session of Diablo2
Operating System Microsoft Windows ME
DirectX Version 8.00
Mobo Manufacturer
Mobo Model 8363-686A
CPU AMD Athlon(tm) Processor 1533 Mhz
FSB 133 MHz
3D Accelerator NVIDIA GeForce3
Graphics Chipset NVIDIA GeForce3
Driver Version 4.13.01.2181
Video Memory 64 MB
Resolution 1024x768 32bit
Texture Format Compressed
FSAA Disabled
Z-Buffer Depth 24bit
Frame Buffer Double
Rendering Pipeline D3D Pure Hardware T&L
3DMark Result 7572 3D marks
Game 1 Car Chase - Low Detail 118.1 FPS
Game 1 Car Chase - High Detail 43.0 FPS
Game 2 Dragothic - Low Detail 117.0 FPS
Game 2 Dragothic - High Detail 60.5 FPS
Game 3 Lobby - Low Detail 116.4 FPS
Game 3 Lobby - High Detail 53.5 FPS
Game 4 Nature 40.0 FPS
Fill Rate (Single-Texturing) 833.7 MTexels/s
Fill Rate (Multi-Texturing) 1642.9 MTexels/s
High Polygon Count (1 light) 19.4 MTriangles/s
High Polygon Count (8 lights) 3.9 MTriangles/s
Environment Bump Mapping 128.5 FPS
DOT3 Bump Mapping 149.0 FPS
Vertex Shader Speed 51.1 FPS
Pixel Shader Speed 101.0 FPS
Point Sprite Speed 18.4 MSprites/s
With the 12.90 drivers i could only get 6658 at the most
Running the card at 248 core and 553 mem
-
-
The new XP Detonators are great, I went from about 140 fps in Quake3 to 180, and from 190 in UT to around 220.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
|
New Security Features Planned for Firefox 4
Another Laptop Theft Exposes 21K Patients' Data
Oracle Hits to Road to Pitch Data Center Plans
Microsoft Preps Array of Windows Patches
Microsoft Nears IE9 Beta With Final Preview
Simplified Analytics Improve CRM, BI Tools
Android Passes RIM as Top Mobile OS in 2Q
VMware Updates Hyperic System Management
File Monitoring Key to Enterprise Security
LinkedIn Snaps Up SaaS Player mSpoke
|
Bookmarks