Hard Drive copy programs?

[jad1097]

http://www.powerquest.com/driveimagepro/

[wedor]

Drive Copy is cheaper and just as effective, also by PowerQuest. I use it to copy NTFS drives often.

[dragonB]

I've used ghost in the past, but it is slightly complicated. I do like that it does just partitions.(I can back up my winpartition, but have all big stuff on a different one.)
Does those other two do partitions? If so, I might have to switch. Also do they run in windows or dos? Ghost does both.(windows barely though)
dragonB

[polarbear]

Ok so i managed to copy my windows 2k drive over to where i wanted it.

I put it on my second hard disk on the raid, the first drive contains windows 98se. When i change the bios to boot to the raid controller the dual boot screen doesnt come up at all, i thought it should seeing as one drive is win2k and the other is win98 on the raid, am i missing something or am i supposed to switch to another drive to boot from?

Raid goes like this:

Primary:
Master: Win98Se
Slave: None
Secondary:
Master: Win2k
Slave: None

How do i set it up to get a dual boot screen

or does someone want to tell me how to sort this right from scratch?
Are there any "How to's" on dual booting at all?

Thanks

Rich

[ItsHuge]

What you need to do is edit the boot.ini file and add the line to specify where your 2nd boot os is, take a look at boot.ini you'll figure it out, refernce the windows 2000 line and copy it and change the necessary lines

[polarbear]

I need to copy one of my hard drives to another drive (which has a bigger capacity) but im not sure which program to use.

Both the drives are NTFS but i dont know of any dos program which would be able to copy all the contents of one hard drive to another. I tried norton ghost but didnt get anywhere

Any help greatly appreciated

Thanks

Rich

[polarbear]

what do i put in the boot.ini file to make win2k recognise win98

both win2k and win98 are on raid
win2k is on a drive with ntfs
win98 is on a drive with fat32

in win2k the win2k drive is seen as drive C:\ and the win98 drive is seen as drive H:\

ive tried adding the line:
H:\ = "Microsoft Windows 98"
with some variations but to no avail

no idea what else i can try

any help greatly appreciated thanks

Richard