Looking for an AT form factor BX mboard

[Lawton]

Does one exist? ...and the big question: does one exist that has SoftMENU Bios?? If anyone knows of one, post a response please. Thanks!

[Isos]

MTech Stallion AT M628 LX Pentium II Board

FIC KA-6100 Apollo Pro AT Pentium II Board

Tyan S1830S Tsunami AT BX Pentium II Board

The above boards come to mind

[bighammer]

628 has a few drawbacks. like only the 66 bus doesn't it? I have got a dual 668 gathering dust but I think a pair of Celeron 400's in my Abit slockets will do just fine now that you remind me.
Anyone looking for a dual board?[ATX]
I have a review of the FIC 6100 at
www.lostcircuits.com/motherboard/ficka6100

[Cyclops]

Lawton -

ASUS makes a good one, but no "SoftMenu"
You can look at it here:

http://www.asus.com/products/Specs/MB/p2b-b-Spec.asp

Later...

Cyclops O-)

[jmatrix]

I've been running the AT form factor Soyo 6bb for two weeks now. It has soft menu and a 66/100 jumper. 300A fired right up at 450mhz (4.5 x 100), then to 464mhz (4.5 x 103) with ease. This is one of the best AT bx boards. Has 3 isa, 3 pci and 1 agp slot. I used samsung gh cas 2 memory. This was accomplished with a beat-up, old Quantum 2.5 gig HD that had been running 24/7 for 3 1/2 years. You can't adjust the voltage, does not seem to matter. Been running Win98, QuakeII without hangs or crashes. A very well-made board. Once I upgrade to a new HD, i'll try pushing it to 504mhz. Bought the Soyo 6BB and the Celron 300A from mwave.com Another good board (and cheap!) is the tomatoboard bx98 made by Zida.
Good Luck,
jmatrix

[saltman]

atrend has a mb with bx in atformat called atc6230. i have seen their atc6130 with lx chip and it had soft menu. look at http://www.a-trend.com/atc6230.html