+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Feb 1999
    Location
    Mannheim, Germany
    Posts
    3

    ABIT BH6 IDE Connectors...

    I've read a review that says that the IDE connectors for this board are 40pins vice the normal 39. is this true? If so, what does one do to get around that? Cut the unused pin on the motherboard, or make a hole on the female end of the connector?
    Thanks,
    Dan


  2. #2
    Member
    Join Date
    Jan 1999
    Location
    Alhambra, CA. USA
    Posts
    336
    Just use the cables that come with the mobo....duh
    I have 5 of them all 300a @ 450mhz

  3. #3
    Junior Member
    Join Date
    Feb 1999
    Location
    Mannheim, Germany
    Posts
    3
    i assume the MB only comes with 1 IDE cable.
    What to do about other IDE devices...

  4. #4
    Junior Member
    Join Date
    Feb 1999
    Location
    Harrison,NY,USA
    Posts
    4
    If you are lucky enough to find IDE cables that have a plastic plug in the slot for the missing pin, it's easy to just push in all the way. If the connector is molded then you'll have to either use a tiny drill or a hot nail.

  5. #5
    Junior Member
    Join Date
    Feb 1999
    Location
    Mannheim, Germany
    Posts
    3
    Jsky... Thanks for a reasonable response.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts







New Security Features Planned for Firefox 4
Another Laptop Theft Exposes 21K Patients' Data
Oracle Hits to Road to Pitch Data Center Plans
Microsoft Preps Array of Windows Patches
Microsoft Nears IE9 Beta With Final Preview
Simplified Analytics Improve CRM, BI Tools
Android Passes RIM as Top Mobile OS in 2Q
VMware Updates Hyperic System Management
File Monitoring Key to Enterprise Security
LinkedIn Snaps Up SaaS Player mSpoke