-
Top Overclocks for less money
The object of overclockin' is supposed to be let me get this right"getting a budget machine running like a top end machine at no extra cost" am i right? so lets have a big output on all your systems spec at stock then spec at overclock the highest wins but remember these have to be stable guys and girls...lets start mine is an AMD Duron 700mhz @ 900mhz i like this speed cause it gives reliability and stability so that's mine...
-
intel pentium 2 350@558. thats bang for your buck
-
that's good value for money...come on there must be some of you that can be saving a lot more money...i wanna hear them all...lol
NRG
( :
-
Good god, I was worrying about O/C my
AmdK6-2 500mhz - 550mhz, any tips?
You guys have got some guts...how do you sleep at night..lol
-
I'm squeezing every last penny out of my $54 duron 600. Was running at 900. Now running at the magic 1 gig mark.
-
You all are so lucky!!! My celly 600 is at 747 but still trying for that 900!
Please bless my celeron O/C god!!!
-
Member
Tbird 750@850, sometimes its at 900
-
DANU one qeustion...How? i've heard that my Duron will run at 1G but can't get it running much faster...it falls right over
Come on there is usally so many people surfing the forums here we have to have some more Top Overclocks...some real awesome money saving ones...after all that's what it's about
NRG
-
Member
Ive got my lil P-!!! 550 running perfect at 770 (5.5 x 140). Im at stock (1.6)volts. Im using a GORB hs/f. It will boot and post at 150 FSB but Win2K wont start ...steve
-
Duron 700 at 1050mz and stable.
-
NRG, it's all in the cards. Some CPUs will do it and some won't. I put a faster fan and had to bump up the voltage to 1.8V to get it working. I haven't tried 1050 yet. It's running pretty hot as it is so I don't want to push it further. Currently 46C at no load, 56C running cpuburn.
-
p3 750@1000 1.85v 29c idle 34 full load
-
Danu what multi settings and fsb are you running i am very curious every time i screw with the fsb on my abit it boots but win me does not like it and it falls over...??????
help...what am i doing wrong?
NRG
-
Member
Just installed my new Cele 566 last night and got it up to a very stable 850mhz at 1.6V on my faithful old BH6. I also just installed a new HDD, so after I get that all straightened out, I'm gonna start working on 952mhz (112mhz FSB). I've been lucky so far, don't want to push it, you know...
Best of luck!!
-
NRG try settin your Vcore to 1.85V and your Vio to 3.4V. Just make sure you have good cooling!
I'm currently running at 100MHz x 10. Vcore is 1.8, Vio is 3.3 (default). I just tried 1050 last night and windows gave me all sorts of BSODs, GPFs, regristry errors, etc. I was bombarded with something like 8 critical errors within 10 seconds of having Windows up. I think my little duron was crying "UNCLE".
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|