366celeron to 550

[sowed]

anyone get a 366 to 550 i have tried @all voltages only 458 have a bh6 even @458 agp &fsb to high, how can you lowerthat speed to near 33&66, i would like to know how to get the 550 then i know the agp &fsb would be ok thanx

[Roy]

C366 not much different than 300a, just passed Intel's test better. Most who reach 504 with 300a report instability. 450 or so seems to be the limit.

Roy

[Maverick]

i've got a 366 too and i also run it at 458.
my proc wont run at 550 too..i dont think that you get it to 550.for ur problem with the fsb & agp speed there's no solution. but all my pci and agp devices run without any problemsif you got problem with ur HD(s) you can lower the PIO-Mode to 3. i had to do this too. exspecialy if you got IBM HD(s).
there's no chance to overclock a 366 without higer bus-speeds

[cruzlow]

I have just overclocked my 366 celery at 550 which gave me a 552 reading.I am using a abit bx6 rev2 mobo with pc100 8 ns sdram 64mb and is running rain. @93 degree's and stable for 6hours and 22 minutes from now.100mhz FSB 5x multiplyer @2.10........I've ran bench tests with it and it blows a pentium II 450 out of the water.Ive ran sandra99pro and bench99 and i wish i can show the charts to you guys.This celery 366 is retail box and the batch# is L9140626......SL35S Date:04/12/99 version#72698-002 2.0V If this helps let me know. And always be careful:O) Email me if you have questions with this because i am suprized myself :O) Oh made in Malaysia.

[Merk]

a friend of mine got his 366 to 550 in the middle of winter, as summer comes now crashes periodically, he clocked it back to around 522 and all's okay.

My point is that heat is the key here.
you may need to add more cooling to achieve 550
oh, what week and location is your celery?

mark