P2 333 @500 MHZ

[Dex]

Maxx, I think you need to read a bit more.
I know for a fact that the Celerons are not the best OC chips out in the market now. Its the P2-300 and P2-333 (deschutes core) that can go to 500mhz and beyond very easily. what does IRELAND have to do with anyting? well, thats where the Chip was made, and thats a big hont for those who are shearching for these RARE chips. Celerons are great Overclockers, but 20% of them don't even post at 450, and they only reach 375. The reason why so many people are jumping on the celerons because they are bloody cheap. $65-80 US compared the a P2-450 at the same speed? you can buy 4 Celery chips for one P2-450 and 8 out if 10 chips will guarantee a 450mhz computer. So why not? The only reason why P2-300s and P2-333 aren't getting alot of shouts is because these chips have been discontinued off the market. Your lucky if you can find one at your retailer cuz 90% of these babys can post at 504mhz. A lower number for 558 but still! thats better than the Celeron. I will trade my 464 for it anyday.

Dex

[gohmdoree]

u tell it bro

[bighammer]

I agree DEX,
the PII 300 retail will give you a 504 machine and most of the time with stock volts{week37}2 of them
Celeron 333 at 500{week 49 and week 47}stock volts.
The newer ones I have not been as lucky with.

[Stryker]

I don't know about 500mhz on a P2-333 (deschutes core), I have one and tried it at 500/100 with 2.00v core and it would not boot. However it runs at 400/100 with 2.00v core very nicely.

[gohmdoree]

i got two of those. definitely a project to take on...i'll let you know when i can get a box set up to try that....

[Sky]

What kind of boards are you guys running these on? And when you say it runs nicely, does that mean it's stable as well as fast?

[Stryker]

Sky,
Mine runs at 400/100 core 2.00v on a BH6 at 92F normal but will go up to 98F at high usage. I am getting a peltier-heatsink-fan combo, hopefully that will drop it a few degrees. It is very stable thus far at these temps, I did notice the first couple of times I rebooted after changing to this speed that windows explorer would cause a page fault. Like I said, it only happend the first couple of reboots and I have not experienced it since.

[This message has been edited by Stryker (edited 02-09-99).]

[bighammer]

2 300PIIs on a Shuttle 469A at 540 2.1v and a single at 504 on the P2B-LS.
Celerons ..one on the BH6 at 500 2v and the other on the Shuttle 661V at 2.1v running at 525.
Reviews on the boards{shuttles}are at
www.lostcircuits.com
just so you don't think I'm just blowing smoke.

[Maxx]

sorry guys stil not sold, what you are talknig about is a 70% preformace jump of both the 300 and the 333 and i still think that is really high.

Oh and what is the record for the most replys on 1 post? We have to be getting close

[Roy]

Stryker Please let us know how the Peltier setup turns out.

Maxx Yeah. Isn't it amazing what will get people tuned up?

Everyone Check my post about Onscreen Temperature Monitoring.

[This message has been edited by Roy (edited 02-09-99).]

[bighammer]

I do reviews..what you think I just make up the benches?
and if it runs 5 banks of winstone...
Manufactures don't just hand out the mobos to test to people who lie.
Ask Sysops
Really I'm trying to be a member
LOL

[This message has been edited by bighammer (edited 02-09-99).]

[ZX1100]

Maybe this will help! As you can see P2-333@515!
CPUID : GenuineIntel, Typ=0, Family=6, Model=5, Step=1
Processor Core : Pentium II, Deschutes
L1 Data Cache : 16 KB, 4way associative
L1 Code Cache : 16 KB, 4way associative
L2 Cache: : 512 KB, 4way associative
L2 Cacheable Area : 4 GByte
L2 ECC : present, but not enabled
Actual clock rate : 515.5 MHz
System clock rate : default: 66.6 MHz, measured:103.1 MHz
Ratio (cpu/syst) : 5.0

ctP2info has detected : Pentium II 515.5 MHz with ECC

Please notify ct via internet: http://www.heise.de/ct/ctp2poll)
L2 Controller : ID:04, Step:00, Type:BSRAM
L2 Manufacturer : ID:09 = Intel
L2 Cache Size : 512 KByte, 1 bank
L2 Latency Mode : 00
L2 Latency : 4
In Order Queue Depth : 8
Fast Strings : true
MTRR0:00000000..07FFFFFF: WB 0 MB .. 128 MB F8000000
MTRR1:E0000000..E1FFFFFF: UC 3584 MB .. 3616 MB FE000000
MTRR2:E2000000..E3FFFFFF: WC 3616 MB .. 3648 MB FE000000
Write Combining for LFB (Linear Frame Buffer) supported

Hope That Helps. Jim

[bighammer]

Winstone 98/Business Winstone 98:Winstone 98 scores (Winstone units) s 29.8 1,2,3
Winstone 98/Business SS/Database:Winstone 98 scores (Winstone units) s 2.22 1
Winstone 98/Business Publishing:Winstone 98 scores (Winstone units) s 3.46 1
Winstone 98/Business WP:Winstone 98 scores (Winstone units) s 3.23 1
Winstone 98/Business Browsers:Winstone 98 scores (Winstone units) s 4.62 1
System Info/CPU Clock Speed 525
System Info/CPU Family 6
System Info/CPU Features 0x0183F9FF
System Info/CPU Floating Point Yes
System Info/CPU L1 Cache (KB) 32
System Info/CPU L2 Cache (KB) 512
System Info/CPU Model 5
System Info/CPU Name Intel Pentium(R) Pro processor with MMX(TM) technology
System Info/CPU Stepping 2
System Info/CPU Supports MMX Yes
System Info/Disk Controller (Make/Model) VIA Bus Master PCI IDE Controller

[SLIer]

There are lots of P2-333 which run nice
by 560 Mhz .

visit the sites

www.alienpc.com
www.overclockers.com

PS:MAX I´ve some from Philipines , they don´t
run with 500 Mhz.
but these from Ireland.........