P2 333mhz OC benchmarks and one strange problem

[Stryker]

Tests taken with a P2 333mhz malay on a BH6 mother board


P2 333/ 66 core 2.00v
Winbench98 CPUMark32 = 819
Q2 fps with voodoo2 = 86.7

P2 333 @ 350/100 core 2.00v
Winbench98 CPUMark32 = 911
Q2 fps with voodoo2 = 94.4

P2 333 @ 400/100 core 2.00v
Winbench98 CPUMark32 = 1040
Q2 fps with voodoo2 = 104.6

P2 333 @ 500/100 core 2.00v
System would not boot!

Strange problem has occured after trying the 500/100 and getting the BIOs to come back up. My system will no longer boot up at 333mhz/ 66 with default core set at 2.00v. It did boot up at 350/100 with core 2.00v. Any ideas as to why?

[This message has been edited by Stryker (edited 02-08-99).]

[This message has been edited by Stryker (edited 02-08-99).]

[Roy]

Just for good measure, clear the CMOS and start over. Don't forget to unplug the PS from the mobo per instructions.

When you're up and running again, try 2.20v for the 500/100 effort.