Can't get PC to boot

[tweed]

I have bought a complete PC (diy - build yourself) but after installing and
putting it together and running it for the first time I can't get it to boot !

The motherboard is Chaintech 7AIV2/100
KT133 + 686B,
TNT2 M64 Video, u-ATX,
Socket- A w/o CPU

The two lights on the front of my machine seem to continuously flash but I
get no response to the screen.

The system and coolmaster fan work but the motherboard doesn't seem to boot.

The motherboard does not make a beep noise either !!

The other parts I am using are -

Western Digital hard drive 2.1GB,
Panaonic floppy 1.44
Memorex 52x cd-rom,
AMD DURON processor 750,
Coolmaster Fan

I also tried just starting machine with all these disconnected except the
motherboard but the same as before I still got the 2 lights flashing !!!

Can u please help me or give me some advice !!!!

UPDATE - its using 128MB SDRAM but them other settings i'm not sure about ? but I know I haven't changed any of these so whatever the default settings are !


[This message has been edited by tweed (edited 06-06-2001).]

[This message has been edited by tweed (edited 06-06-2001).]

[surrealchereal]

Uh I can ask this because I am "officially" the president of the Moron's Club this week.

what is it running @ by that i mean is it 100mhz or 133mhz and what is the mobo set to run it @

Requesting clarification of the above statement, her dim bulb may have just gotten a couple watts brighter...
Or as Grasshopper might say "Please Master, explain"

[marc666]

then allow the master to explain what i ment was is he running PC100 or PC133 RAM sorry if my expectations of maybe the "TECHS" on this board understanding this and the reason for the questions is as follows on some motherboards i have noticed that a setting for PC133 will not allow the borad to boot even when using "PC133 RAM"
oh young "grasshopper"

[marc666]

i have a question fer ya, what type of mem are you using and what is it running @ by that i mean is it 100mhz or 133mhz and what is the mobo set to run it @.......