Results 1 to 4 of 4

Thread: PCI Controller Card SATA, IDE, RAID-dont know how to connect use? winxp

  1. #1
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    PCI Controller Card SATA, IDE, RAID-dont know how to connect use? winxp

    Have a PCI Controller Card SATA, IDE, RAID for my winxp, later win7-PC.
    its Mod.-Nr. 19739/20140922SZ009 by CSL germany.
    NB: Sata-slots on card are wrongly specified in jumper-table CN2 is confused with CN3, wrongly named on card.

    Driver is installed. i had choices. older were also available so i took newest. no information in the sheet.
    They also do not tell that admin.right are needed.
    Choises are:

    A. Internal SATA Port CN3 + External SATA-Port/eSATA CN2

    B. Internal SATA Port CN1 + Internal SATA-Port CN3

    Actual jumpering is for A. using external esata-slot.
    Maybe its wrong thinking:
    i connected internal SATA-drive to the internal slot, esata is empty - I DONT SEE this drive
    I will now change jumpering in verify.
    so temporary using choice B.

    Maybe i must connect pc-card with internal sata-slot and use drive externally?
    i will wait until an answer is coming. Thanks a lot
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #2
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Via V-raid- Controlbox in admin-account(i let it start with windows) is telling no disk.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  3. #3
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Dang.
    I be lost for real.

  4. #4
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    i have now esata-connection but this time through the slow internal sata-slot through pci-sata-card. will now do a systempartition(70gb) backup like i did through the second speedy slot through special-esata-MOBO-connector. and the initial backup(for incrementals) was very quick.
    the idea is now-for win7 to use the speedy second slot for 65 gb ssd-swapfile-exclusive and maybe data-hdd/ssd later on second slow SATA. using esata-slot for backups.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •