3D-Printing-Uploading data-Which scale to set?
Results 1 to 5 of 5

Thread: 3D-Printing-Uploading data-Which scale to set?

Hybrid View

  1. #1
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,417

    3D-Printing-Uploading data-Which scale to set?

    https://i.materialise.com/3dprintlab...a-df6fde131334

    want to know how much would cost to print a small special shim. I have got the drawing(both formats) of my idea from a friend.
    its in mm and grid is 2mm. object is 36mm diameter.
    So what do i have to set under scale here?
    https://i.materialise.com/3dprintlab...a-df6fde131334
    thanks a lot
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #2
    Moderator
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,910
    Click and hold, then slide.

  3. #3
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,417
    Why? dont understand what scale is for.
    when set to 100% this is shown:
    The dimensions of the model are outside the allowed range for Polyamide. Please fit it in the range of 1x1x1 and 330x560x650 mm by using the scaling option below.
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  4. #4
    Moderator
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,910
    Drive me nuts it does.

  5. #5
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,417
    I can slide but i dont understand what they need. maybe i should upload some examples. will first ask elsewhere.
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •