dcsimg
Results 1 to 10 of 10

Thread: 3D-Printing-Uploading data-Which scale to set?

  1. #1
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,720

    3D-Printing-Uploading data-Which scale to set?

    https://i.materialise.com/3dprintlab...a-df6fde131334

    want to know how much would cost to print a small special shim. I have got the drawing(both formats) of my idea from a friend.
    its in mm and grid is 2mm. object is 36mm diameter.
    So what do i have to set under scale here?
    https://i.materialise.com/3dprintlab...a-df6fde131334
    thanks a lot
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #2
    Moderator
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Click and hold, then slide.

  3. #3
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,720
    Why? dont understand what scale is for.
    when set to 100% this is shown:
    The dimensions of the model are outside the allowed range for Polyamide. Please fit it in the range of 1x1x1 and 330x560x650 mm by using the scaling option below.
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  4. #4
    Moderator
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Drive me nuts it does.

  5. #5
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    3,720
    I can slide but i dont understand what they need. maybe i should upload some examples. will first ask elsewhere.
    www.stereopan.tk
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  6. #6
    Junior Member
    Join Date
    Apr 2018
    Location
    Tampa, Florida
    Posts
    4
    Yup, this confuses me as well.

  7. #7
    Junior Member
    Join Date
    Aug 2018
    Posts
    2
    I really have to save up for a 3D printer.

  8. #8
    Junior Member Degutis's Avatar
    Join Date
    Dec 2018
    Posts
    0
    Hi there,

    Does anyone know where to find a good geometry program for setting the dimensions of the model within an automated frame? I've been searching for the solution on Math.stackexchange, but there's no answer so far, though I started a discussion about a month ago.

  9. #9
    Junior Member Degutis's Avatar
    Join Date
    Dec 2018
    Posts
    0
    Perhaps, someone has a link to the online book Elementary Vector Geometry by Seymour Schuster. Or A Vector Space Approach to Geometry by Melvin Hausner. I'd appreciate any ideas and directions where to find it.

  10. #10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •