-
winxp doesnt start-new monitor-HP-Compaq DX6100
We had a black screen on HP-compaq DX6100-winxp-pc.
it was not the first time when screen was killed on that pc.maybe a static discharge. have now main ps-cable at distance of feet.
This is what i was working at when we had black screen.
Had external usb-drive installed-new driver. then after switching to admin-account pc was blocked. instead of unplugging i shut down pc.
When i recognized external videocard was ok(tested with other pcs screen) i knew it was the used screen. only briefly startscreen(dos) was shown. so screen was dying.
With other pcs screen i could make winxp start. but not now with new screen anymore.
When dos-command are coming to choose if last working session should be used none of two keyboards react.
I cleaned all contacts inside and outside pc. none of the usb-slots are working.
I tested also onboard video. cannot go to cmos-setup F10. keyboard does not react. maybe testing with ps2-adapter? Thanks a lot
maybe the key to the solution is this:
at start it says 512(thats the error message code) chassis-fan not detected.
maybe the sensor is defective/stuck. all fans are rotating.
maybe the answer is here:
http://www.sysopt.com/showthread.php...-Detected-HELP!!!!!
Last edited by europanorama; 09-17-2016 at 03:33 PM.
-
SOLVED
It was the wrongly reconnected speaker-cable. speaker was offset-screws gone.... it was hard to find the right speaker-connector name Speakr...
this pc has an autodetector for video(card), no option changing external/internal video in cmos.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|