Page 4 of 4 FirstFirst 1 2 3 4
Results 46 to 57 of 57

Thread: Memory management-problems on winxp-pc(new process-new MOBO)

  1. #46
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Ok i will install a new hdd with new winxp. waiting upgrading to 8gb for win7-64 fo at least 240gb ssd. at the end of these procedures hopefully new skylake-pcs will be here with affordable consumer DDR-4-16gb-memory with option 128gb. 8x16gb......
    had desktop blocked, recover old systempartition-backup. bluescreen reappeared. new mobo-driver-installation and have found amd-driver coolnquiet on my pc.....
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #47
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    How about purchasing one more identical videocard? need it anyway when the old one breaks. then i could give the older one back.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  3. #48
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    Memory management-problems on winxp-pc(new processor-new MOBO)

    In title should show:new processor
    Maybe good idea and update videocard to 2gb one first? or could do that later after new hdd/winxp-installation. is quickest and cheapest solution. could switch MOBO before doing and try and use old HDD immediately before installation. Maybe better starting with MOBO-change altogether and let it run until bluescreen is coming or not. and do HDD-backup to new HDD. could replace systempartition later with new installation if bluescreen is asking.
    1. get new HDD.
    2. backup old HDD
    3. switch MOBO
    4. check old HDD for bluescreen
    if still there copy new systempartition to old drive.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  4. #49
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    A plan.

  5. #50
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Will first try to solve possible antistatic problem. cables near feet now displaced. Will connect MOBO with heating(blanc part). when its hot and dry static problems are imminent. in the 80ties when working with a pc-like-system(a writing system with 5 1/2" floppies) we permanently had troubles causing the machine to crash. maybe it would be wise to install an antistatic plate under my seat. or antistatic also under open pc.
    on p4-pc i had floppy-drive earth-grounded.
    Last edited by europanorama; 07-26-2015 at 01:07 AM.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  6. #51
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Should not hurt anything.

  7. #52
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    I will reorganize my cable-chaos, earthing the MOBO, change the switch(see other thread) maybe switching to old 500gb-hdd and see whats going on. but i will backup 2tb-hdd anyway.
    had to switch to cable-bound ps2-mouse. cannot be use on usb-switch on adapter. will update replace the mouse too. and keyboard. maybe that is the real reason.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  8. #53
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Possibly.
    I had to buy a new USB KVM because of NO PS/2 on computer.

  9. #54
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    my asrock alive dual esata2 is really very universal and stable. someone wanted explicitely both... but i could withstand. Would you ever exchange the best cow in the house?
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  10. #55
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Actually the darn cow was a money loser, Not enough butter fat. Got rid of her fast.

  11. #56
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    surronding the problem i am more than convinced that its a electrostatical problem caused by my carpet. When handling with my cable i also touched my antistatic-arm-cable which is blanc at the connection-position. i have got a shock/discharge, also when touching PSU. The same could have happened when i started the machine using a DIY-button. MOBO outside case. I also have a reset know which is sitting elsewhere hidden not to be touched accidentally. so the bluescreen could be no software-problem. cable-salad now cleaned as good as possible. all cables out of foot-reach. its silent now. we will see.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  12. #57
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Carpets and wool will fru computers. Static is a pc killer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •