-
Problem with Mem management-bluescreen coming back. New installation should cure that.
-
Originally Posted by europanorama
good tip. i only had to reassociate 3gp and mp4.
Plus MOV.
-
mem-management problem started when i switched not only motherboard(have replacement but also videocard.
will switch back to the old one. switched since i also had to change to a better cooler.
-
All that switching adds up.
-
maybe a antistatic problem? but this was never the case with the other identical MOBO. that one went up to over 60° C! will add a wire to the heating like i did with p4 which was very vulnerable. yes, i do not touch the open pc. all parts are outside. but maybe its all the wires near my feet. maybe i shoud guide the printer-cable elsewhere, also videocard-cable to switch-box. MOBO is now on small wooden sockets for better airflow. when it was hot temperature went up to 50°C anyhow despite quite perfect cooler. maybe one should replace thermal grease from time to time. watercooling would be nice to run processor at 35°C. gpu 32°C, core 43°, HD0 40°, cpu 46, core 33° C. its the cores of GPU and CPUs, right? i have all two/three chips active-cooled.
would be interesting if its really the memory. memtest386 was ok. if i will switch to 64bit win7 i must upgrade to 8gb anyhow.
maybe better switching back to old videocard. maybe its the new videocard which is too powerful. its geforce gt 630. remember: i switched MOBO and videocard at the same time. now i am reflecting which action is less timeconsuming. replacing MOBO or cleaning videodrivers. if the latter which are the right steps. afte cleaning reinstalling old card or start with new one alltogether?
Last edited by europanorama; 06-15-2015 at 03:38 PM.
-
Clean up the video drivers and start from scratch with the video drivers.
-
-
had to use new version and patience needed until pc will restart if asked to do. and not allowing windows updating. cd-installation worked. very curious if its cured now.
some files were not removed. it was asked to send author logfile.
-
Problem still evident. bluescreen with reboot. Twice it happend again within days. First when i was sitting nearby and right now when i was away, temperature at night not so high(47°C). It was the first time i could see no file mentioned. And i have now only printer cable near my feet. So it cannot be the problem since i didnt touch.
Maybe running the other drive for some time. then we know whether its time for a new setup.
maybe i wll run without the monitor- keyboard-mouse-switch. old cable-mouse seems not so compatible anyway. also cheap wireless mouse had troubles from time to time. time to change mouse and ps2-keyboard. both from labtec. had troubles with the usb-adapter(noname). first when it was delivered with cold soldering points. everything not bought from pc-store...
-
-
Life is hope, but only with a lot of work, otherwise hopeless life.....
-
2. ccleaner in startup is showing kernel fault check
systemroot system32 dumprep 0 -k
should i remove that or deactivate? maybe bluescreen will not reappear.
Last edited by Train; 07-24-2015 at 08:52 PM.
-
Clean out all the blue screen stuff, that way when one hits, it will only be new stuff in event viewer.
-
Will reinstall winxp on a new hdd. Should i stay on that second MOBO or also switch back to the old one? But there are still the drivers of the old videocard. so the same problem could reappear.
If one day i must do anyway(switching back to MOBO 1) what are the right steps to avoid that problem? Cleaning videodrivers? I switched MOBO(identical one) and also videocard. winxp
interesting was someone was explicitely interested to get both. it has ide and sata. Very stable. I would have been very stupid to kill all my work when selling.
-
Which ever one is easier to deal with.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|