Results 1 to 6 of 6

Thread: Non-standard screws for HP-compaq DX6100 minitower-Slot-In

  1. #1
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    Non-standard screws for HP-compaq DX6100 minitower-Slot-In

    Need special screws 6x2x4mm (LxHxD) lenght,Headdiameter-Headdiameter for hdd (Slot-In-mounting) hp-compaq dx6100 minitower or similar. 10 pcs. head is rectangular/rightangled Thank you very much
    BTW:
    strange is this: one can mount two hdd over eachother with reduced temperature circulation, leaving out one floor would not work since slipin-system is for floppy or other drive where screws must be located elsewhere.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #2
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Solved:
    http://h30434.www3.hp.com/t5/Desktop...0/td-p/2683025

    maybe i have some hidden in my screws-backup.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  3. #3
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Solved-
    Found the right screws . For HDDs silvery and for other drives black. Replacements are stored inside pc! If using the wrong ones which are too small then hdds are wobbly.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  4. #4
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Quote Originally Posted by europanorama View Post
    Solved-
    Found the right screws . For HDDs silvery and for other drives black. Replacements are stored inside pc! If using the wrong ones which are too small then hdds are wobbly.
    Solved on the paper. Of course there were none there.....
    Here is an alternative.
    http://www.ebay.com/itm/4-x-3-5-driv...-/321627428198
    They do not ship to CH or very expensive.
    Have found two which could work in my remains.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  5. #5
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    SOLVED-Free shipped from UK

    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  6. #6
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    NONSOLVED! Wrong screws!

    mentioned screws are wrong! image will follow with solution.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •