Page 2 of 2 FirstFirst 1 2
Results 16 to 30 of 30

Thread: "This application needs administrators rights...." at start of restricted account.

  1. #16
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Here seems a solution for my speedfan-problem but instructions are not really precise.
    http://www.sevenforums.com/software/...s-systray.html

    will retry these instructions.
    http://forum.chip.de/rund-um-softwar...g-1266251.html
    Last edited by europanorama; 08-04-2014 at 10:04 PM.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  2. #17
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    Solved

    Speedfan as shortcut in autostart solverd the problem.
    both speedfan and speccy now shown in taskbar.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  3. #18
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Usually where you would place a program to auto start.

  4. #19
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Yes but it makes me furious when i dont read that elsewhere in speedfan-instructions. The author could have easily implemented that important instruction.
    there is a "in try" button but working only temporary.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  5. #20
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    maybe better to add also speccy to autostart. i cannot make both show up in infobar. in restricted account its always showing the "administrators rights-warning". I must always minimize speedfan(very boring).
    I tried out multiple things. first speedfan, first speccy. inside "restriced"account, admin-rigths given. etc. I will give up if you dont have THE solution.

    If i remember right i didnt have this problem beforehand.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  6. #21
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    If temps are no where near 60C, I do not run any temp programs but maybe once a month.

  7. #22
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    Its wierd that on new hdd both are running and speedfan is minimized or only showing up in infobar but on old hdd(where i had to repair bootsector) no chance. i have now only set speedfan-cpu-temp, running in autostart.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  8. #23
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    I would say your old hdd is just about to quit on you.

  9. #24
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    yes better setup a newer one. But its now speeded up except for that single problem. too much time lost. Oity my bootpartition on esata is only 34gb(other pc). but i could replace by the old one from pc2(the one we discussed) which is 34gb too.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  10. #25
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    Partly solved- Speccy kicked out-Speedfan working alone

    No need to parallel running both temperature-programs speedfan and speccy. Speedfan can display temperature alone, with mouse all others too.
    workaround:
    1. during installation and setting working account must have administrators rights to save parameters. a) start minimized b) close when minimizing
    2. speedfan must be in autostart to be seen in taskbar(if i dont err).

    Speedy given up
    Old setup was speccy included. in administrator account both temperatures(GPU and CPU) could be displayed, one with speedfan, the second with speccy.
    I gave it up since i could not make speccy display it in restricted account also. maybe the same must be done like with speedfan.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  11. #26
    Moderator
    Join Date
    Sep 2013
    Location
    Maryland, USA
    Posts
    692
    CCleaner's default settings are fine. (Options > Advanced > Restore Default Settings).

  12. #27
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100
    I have found a site telling what must be set in ccleaner. thanks train.
    But what has this to do with speedfan, speccy-problem?
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

  13. #28
    Lifetime Friend of Staff
    Join Date
    May 2007
    Location
    Sheboygan, WI
    Posts
    3,921
    Maybe nothing

  14. #29

  15. #30
    Ultimate Member
    Join Date
    Jul 2001
    Location
    Basel-Switzerland
    Posts
    4,100

    Speedfan running properly- SOLVED

    Procedure to install Speedfan properly.
    1. In registered account with admin.-rights install speedfan. No need to have it in autostart.
    2. configure options, set: start minimized
    3. i have set gpu and cpu to shown in taskbar and set large(font/icon)
    4. minimize.
    5. in go to admin-account and set back restricted account with admin.rights.
    6. logout and go the restricted account and logout there too.
    restart work.
    no more one will see speedfanevents or....params.cfg(dont remember which one) cannot be saved.
    maybe there is a different workaround with the accounts. I only know if one is setting back restricted account with admin-rights too early the saving-alarm will popup.
    with speccy this would be even more complicated. or now easier since we know how speedfan is working.
    by laying mouse onto icon one will see cpu-temp too. with new cpu with old cooler it is now surpassing gpu a but. gpu-temp is shown as default.
    with speccy one could show CPU-temp permantently. will try again later when cooing problem is solved. pc is easily freezing(new behaviour), when working too quick with commands on desktop. maybe has to do with the new autochk-problem discussed elsewhere.
    www.stereopan.org
    underreconstruction
    3Daeropanorama
    was: 3DMarspanoramas
    3DVideos
    www.3dmedia.ch
    www.3dmusic.ch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •