Hanging during SATA-recognition

[europanorama]

1. i removed the third-unidenticate 1gb stick-ddr.
2. did a defrag with perfectdisk.
3. have to go back due to multiple problems.
4. removed a unstable cooler. hdd is on a wooden diy-rack. remember: all my pcs are fully open.
temperature is good.
5. will buy new ram.
6. current
a) all pc-stuff had current from lines inside the working place.
printer is coming from point a) line 1/2
all other pc-stuff is coming from point b)1/2
i have other electronics having current from kitchen from different point than refrigerators(i have a deepfreezer and normal frigo). kitchen and working place have different fuses.
in hot summer like now a big cooler could run during pc-work. dont have air-condition.

In our old house-60 years old- we have only two-line-current! no third line-endurance?

I had an unstable-plug which had to be replaced(something broke inside), in the meantime until today, i had a line from kitchen to feed to printer and some other non-pc-stuff. i reported this problem elsewhere.
pc is 8 years old. cannot change at the moment.

PC is stable now, except unable updated netframework.
since i will evaquate data anyway soon with DBAN new xp-installation i dont bother about this.

[europanorama]

I tested a backup-drive, established before the problems occured but using systempartition of the problematic drive.
Strangely the same symptoms-error-message can be seen like today.... see attachm.in german.
will now check PSU. replacîng it if possible.
i have multiple tasks on one line. above all processor-cooler. must get the right plug. mine is molex.
have also a coolor beneath MB cooling northbridge. everything is freely accessible, pc open. temperatures seem ok. will double-check them. maybe something is overheating. have only 64mb-videocard. but cooled.
now surfing on my good ide-drive-no problems at all.
will check sata-drives.
will also replace memory-use those from second pc.

[europanorama]

I tested a backup-drive, established before the problems occured but using systempartition of the problematic drive.
Strangely the same symptoms-error-message can be seen like today.... see attachm.in german.
will now check PSU. replacîng it if possible.
i have multiple tasks on one line. above all processor-cooler. must get the right plug. mine is molex.
have also a coolor beneath MB cooling northbridge. everything is freely accessible, pc open. temperatures seem ok. will double-check them. maybe something is overheating. have only 64mb-videocard. but cooled.
now surfing on my good ide-drive-no problems at all.
will check sata-drives.
will also replace memory-use those from second pc.

[europanorama]

change to molex-line of psu for sata-drive(backup). will now go to original and be not surprised. it MUST work.
I have found a german site which confirmed problems with overload or current-problems.