Upgrading Vista Ultimate to Windows 7 Ultimate Failing
Results 1 to 5 of 5

Thread: Upgrading Vista Ultimate to Windows 7 Ultimate Failing

  1. #1
    Junior Member
    Join Date
    Nov 2009
    Posts
    2

    Upgrading Vista Ultimate to Windows 7 Ultimate Failing

    Am Trying to Upgrade from Vista Ultimate 64 (All Updates incorporated) to Windows 7 64 bit.
    Have no compatibility issues. Registry has been cleaned and optimised. Check Disk performed on c:\ (No errors)
    Am performing the upgrade from the Administrator LogOn so User Control is not an issue.
    System is backed up through Windows Home Server.
    System Details:
    OS Name Microsoft® Windows Vista™ Ultimate
    Version 6.0.6002 Service Pack 2 Build 6002
    Other OS Description Not Available
    OS Manufacturer Microsoft Corporation
    System Name MAIN
    Motherboard ASUS
    Motherboard Model M3N78SE
    System Type x64-based PC
    Processor AMD Phenom(tm) II X4 940 Processor, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
    BIOS Version/Date American Megatrends Inc. 0602, 13/01/2009
    SMBIOS Version 2.5
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume1
    Locale United Kingdom
    Hardware Abstraction Layer Version = "6.0.6002.18005"
    User Name Main\Administrator
    Time Zone GMT Standard Time
    Installed Physical Memory (RAM) 4.00 GB
    Total Physical Memory 4.00 GB
    Available Physical Memory 1.81 GB
    Total Virtual Memory 9.91 GB
    Available Virtual Memory 6.87 GB
    Page File Space 6.00 GB
    Page File I:\pagefile.sys

    I run the setup programme, do online update (OK), Compatibilty Check (No Issues)
    Programme then loads files (Creating three directories on C:\)
    Immediately that files are downloded it goes to next action and immediatetely goes to:
    The Upgrade Was Cancelled
    Any changes that were made to your computer during the upgrade will not be saved.
    Setup can't continue, Restart the computer and restart Setup. When prompted try getting the latest updates.

    Have tried over ten times with the same result on each occasion.

    PLease do not suggest a clean install this is a home\office system and I haven't enough time left in my life to reload everything from scratch including all of the updating that goes with it on my 1.5mb broadband.

    The end of the Panther Log (Full version available if required) is:

    2009-11-20 09:41:24, Info [0x080073] MIG Migrate: Migration side is: source
    2009-11-20 09:41:24, Info Entering UpgCanMigrateToThisSystem method
    2009-11-20 09:41:24, Info [0x08034c] MIG UpgCanMigrateToThisSystem: detected OS version: 6.0.6002 Service Pack 2
    2009-11-20 09:41:24, Info Leaving UpgCanMigrateToThisSystem method
    2009-11-20 09:41:24, Info MIG Migrate: Upgrade is using replacement manifests in C:\$WINDOWS.~BT\Sources\ReplacementManifests
    2009-11-20 09:41:24, Info [0x080075] MIG Migrate: Initializing migration engine in online mode
    2009-11-20 09:41:24, Info Entering UpgStartUp method
    2009-11-20 09:41:24, Info [0x0803ac] MIG Initializing online WinNT platform (Read Only)
    2009-11-20 09:41:24, Info MIG Platform is using admin privileges
    2009-11-20 09:41:24, Info [0x0803df] MIG Adding direct mapping from HKLM to HKEY_LOCAL_MACHINE (R/O)
    2009-11-20 09:41:24, Info [0x0803e1] MIG Successfully mapped HKLM
    2009-11-20 09:41:24, Info [0x0803df] MIG Adding direct mapping from HKU to HKEY_USERS (R/O)
    2009-11-20 09:41:24, Info [0x0803e1] MIG Successfully mapped HKU
    2009-11-20 09:41:24, Warning [0x08040b] MIG State data store failed calling CoInitializeEx in apartment-threaded mode. (hr = 0x80010106)
    2009-11-20 09:41:24, Info [0x08040e] MIG State data store is available.
    2009-11-20 09:41:24, Warning [0x080262] MIG GAC data store failed calling CoInitializeEx in apartment-threaded mode. (hr = 0x80010106)
    2009-11-20 09:41:24, Info [0x0803b4] MIG COnlineWinNTPlatform: ComputerName=MAIN
    2009-11-20 09:41:24, Info [0x0803b5] MIG COnlineWinNTPlatform: Get Machine Sid S-1-5-21-2661779917-3657288831-154045754
    2009-11-20 09:41:24, Info [0x0803b8] MIG Processing profile: C:\Windows\system32\config\systemprofile
    2009-11-20 09:41:24, Info [0x0803bf] MIG User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-18 excluded because SID S-1-5-18 is excluded by default.
    2009-11-20 09:41:24, Info [0x0803b8] MIG Processing profile: C:\Windows\ServiceProfiles\LocalService
    2009-11-20 09:41:24, Info MIG Could not retrieve SID from 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19 [Sid]'. Assuming 'S-1-5-19' (from 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19') to be a valid SID
    2009-11-20 09:41:24, Info [0x0803bf] MIG User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-19 excluded because SID S-1-5-19 is excluded by default.
    2009-11-20 09:41:24, Info [0x0803b8] MIG Processing profile: C:\Windows\ServiceProfiles\NetworkService
    2009-11-20 09:41:24, Info MIG Could not retrieve SID from 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20 [Sid]'. Assuming 'S-1-5-20' (from 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20') to be a valid SID
    2009-11-20 09:41:24, Info [0x0803bf] MIG User profile HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-20 excluded because SID S-1-5-20 is excluded by default.
    2009-11-20 09:41:24, Info [0x0803b8] MIG Processing profile: C:\Users\Colin A Roberts
    2009-11-20 09:41:24, Info MIG Querying for user data from the blackboard at Upgrade\UserData\S-1-5-21-2661779917-3657288831-154045754-1000
    2009-11-20 09:41:24, Warning MIG Failed to retrieve cached user name from the blackboard.
    2009-11-20 09:41:24, Warning MIG Failed to retrieve cached user domain name from the blackboard.
    2009-11-20 09:41:24, Info MIG Setting user data in the blackboard at Upgrade\UserData\S-1-5-21-2661779917-3657288831-154045754-1000
    2009-11-20 09:41:24, Info [0x0803e2] MIG Adding indirect mapping from HKCU to <C:\Users\Colin A Roberts\NTUSER.DAT> loaded at HKEY_USERS\S-1-5-21-2661779917-3657288831-154045754-1000 (R/O)
    2009-11-20 09:41:25, Info [0x0803e4] MIG Successfully mapped HKCU
    2009-11-20 09:41:25, Info [0x0803e2] MIG Adding indirect mapping from HKCU\Software\Classes to <C:\Programmes2\Users\Colin A Roberts\AppData\Local\Microsoft\Windows\UsrClass.d at> loaded at HKEY_USERS\S-1-5-21-2661779917-3657288831-154045754-1000_Classes (R/O)
    2009-11-20 09:41:25, Error [0x0803dc] MIG IndirectKeyMapper: RegOpenKeyEx(HKEY_USERS,S-1-5-21-2661779917-3657288831-154045754-1000_Classes,R/O) failed (5)[gle=0x000003f0]
    2009-11-20 09:41:25, Error [0x08039d] MIG Cannot add mapping for user profile C:\Users\Colin A Roberts. Error: 5: Win32Exception: Access is denied. [0x00000005] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,const Mig::HiveLoadRetryOptions *)[gle=0x000003f0]
    2009-11-20 09:41:25, Error [0x080801] MIG User profile loading error. Aborting due to external request.[gle=0x000003f0]
    2009-11-20 09:41:26, FatalError [0x090001] PANTHR Exception (code 0xE06D7363: <unknown>) occurred at 0x0000000076D176FD in C:\Windows\system32\kernel32.dll (+00000000000176FD). Minidump attached (107341 bytes).
    2009-11-20 09:41:26, Warning [0x0803de] MIG Failed to unload hive at HKEY_USERS\S-1-5-21-2661779917-3657288831-154045754-1000 (error 1314)
    2009-11-20 09:41:26, Warning [0x0809cd] MIG Failed to close keymapper 'HKCU': error 1314
    2009-11-20 09:41:26, Warning [0x0803de] MIG Failed to unload hive at HKEY_USERS\S-1-5-21-2661779917-3657288831-154045754-1000 (error 1314)
    2009-11-20 09:41:26, Error [0x0802fa] MIG UpgStartUp caught exception: Win32Exception: User profile loading error. Aborting due to external request.: The specified user does not have a valid profile. [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform::ProcessUser(class Mig::CRegistryDataStore *,class Mig::CRegistryDataUnit *,class UnBCL::String *,class UnBCL::String *,int)
    2009-11-20 09:41:26, Info Leaving UpgStartUp method
    2009-11-20 09:41:26, Info MIG Migrate: migration operation failed (MigResult=4)
    2009-11-20 09:41:26, Info [0x08008c] MIG Migrate: Shutting down with cleanup..., gle:0
    2009-11-20 09:41:26, Info MIG UpgShutDown returning immediately, since the facade is not initialized
    2009-11-20 09:41:26, Info [0x08008d] MIG Migrate : Finished (0)
    2009-11-20 09:41:26, Warning [0x0800ad] MIG Callback_GatherOldSys: Migrating to (C:\$UPGRADE.~OS\OnlineMigStore) did not finish successfully
    2009-11-20 09:41:26, Info MIG PublishCriticalError: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest updates.
    2009-11-20 09:41:26, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress.
    2009-11-20 09:41:26, Info UI Entering Page Cancel.
    2009-11-20 09:41:26, Info UI Some issues soft appcomapt
    2009-11-20 09:41:26, Info UI Shouldn't be here for drv issues
    2009-11-20 09:41:26, Info [0x0a0035] UI Allowing Page 'App Compat' to be shown
    2009-11-20 09:41:26, Info UI Some issues soft appcomapt
    2009-11-20 09:41:26, Info UI Shouldn't be here for drv issues
    2009-11-20 09:41:26, Info [0x0a0035] UI Allowing Page 'App Compat' to be shown
    2009-11-20 09:41:26, Info [0x0a011c] UI WizardDialogPost::SetActive

    Pease help: I have been using Windows RC7 on another machine and found it excellent and a great improvement on Vista - but it looks as though I will be a prisoner of Vista for the future.

  2. #2
    Administrator Steve R Jones's Avatar
    Join Date
    May 1999
    Location
    Dallas, Tx
    Posts
    5,155
    Click on Start->Run and type: WINVER

    Does it say Ultimate or Home Prem?
    Does it mention 64bit?

  3. #3
    Junior Member
    Join Date
    Nov 2009
    Posts
    2

    Version

    Upograding from Vista Ultimate 64 bit to Windows 7 Ultimate 64 bit

  4. #4
    Stark Raving MOD Midknyte's Avatar
    Join Date
    May 2002
    Location
    Arkham Asylum
    Posts
    22,180
    Lots of people are having upgrade problems. No official fix has been posted yet.

    http://www.pcworld.com/article/18112...continues.html

  5. #5
    Ultimate Member CrazyCrusher's Avatar
    Join Date
    May 2003
    Location
    Wisconsin, Milwaukee
    Posts
    3,045
    One of the reasons why I always go fresh install, I have had to many issues upgrading, id rather deal with reinstalling every thing.
    EVGA GTX 470
    OCZ 6GB (3 x 2GB) DDR3
    EVGA 141-BL-E757-TR LGA 1366 Intel X58 SLI
    COOLER MASTER Stacker RC-832-KKN1-GP Black
    Intel tel Core i7-920 Bloomfield 2.66GHz Quad-Core

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •