Results 1 to 7 of 7

Thread: Norton Ghost 2003

  1. #1
    Member Big Will's Avatar
    Join Date
    Sep 2001
    Location
    Cleveland, Oh.
    Posts
    109

    Norton Ghost 2003

    Hi guys,
    I'm trying to do a backup of my system, using ghost, but about halfway through it bombs out and I get this message.
    BackupOperation 0

    -- GHOST\GHOSTERR.TXT ---------------------------------------------------------

    *********************************
    Date : Fri Mar 26 07:33:44 2004
    Error Number: (29004)
    Message: Read sector failure, result = 1, drive = 0, sectors 5692503 to 5692567
    Version: 2003.793 (Dec 17 2003, Build=793)
    Command line arguments: -igb -z1 -imgdescfile=\ghost\imgdescp.txt -wizard -clone,mode=create,src=@GFacecc14f-5370-4aff-bfe7-a6fe2e51d245,dst=@GFaa4596e3-617f-4b2e-8c8b-738d9be77f82:63\backup.gho -ghwrap
    Active Switches :
    AutoName
    Sure
    ProgMode : PROG_LOCAL
    PathName : 41942 Unnamed MFT Table entry
    DumpFile : @LFO2:1\BACKU007.GHS
    DumpPos : 15672158415
    File64 buffersize : 0
    FlagImplode : 2
    FlagExplode : 0

    CloneSrc : 1
    BatchPartSrc : 0
    BatchPartMSrc :

    CloneDst : @LFO2:1\BACKUP.GHO
    BatchPartDst : 0

    Operation Details :
    Total size.........31194
    MB copied..........15680
    MB remaining.......15514
    Percent complete...50%
    Speed..............843MB/min
    Time elapsed.......18:35
    Time remaining.....18:23

    Program Call Stack
    Generic_Abort
    ReadDiskSectorsNoOverlayTranslation
    ReadDiskSectors
    ReadPhysSectors
    ReadNTFSVolume
    NTFSReadClusters
    dumpRun
    dumpAttribute
    dumpAttributes
    dumpMFTRec
    dumpMFT
    dumpVol
    DumpNTFSPartition
    ProcessNTFSPartition
    CopyPartition
    ProcessAllPartitions
    CopyAllPartitions
    CopyDiskToFile
    CopyMainline
    AttemptOperation
    sub_main
    main

    Call Stack
    0x0023f3c7
    0x0006b29f
    0x0006a54c
    0x0006a3c1
    0x0006ba23
    0x0009681a
    0x000969fe
    0x0011e4a5
    0x0011ecdd
    0x000cb53e
    0x000d2984
    0x000d2738
    0x000d23cc
    0x000d2136
    0x000d1e5d
    0x000d175c
    0x0009d27d
    0x0009f970
    0x0002d8fa
    0x0002d0f9
    0x0002cf33
    0x0002b9f6
    0x000022c5
    0x000023f3
    0x00004426
    0x0000370b
    0x0024cac8
    End Call Stack


    Start heap available: 798162944
    Cur heap available: 729219072
    Total Memory: 804192256

    Conventional Memory
    Inital Conventional Memory Size = 447920
    Current Conventional Memory Size = 286688
    Allocated
    1024 DpmiDjgpp.cpp:59
    33504 ghost.cpp:913
    528 IdeDmaServerPci.cpp:132
    528 IdeDmaServerPci.cpp:132
    32 DiskDriveAccessExInt13.cpp:107
    512 DiskDriveAccessExInt13.cpp:107
    32768 LfoDeviceCommand.cpp:80
    32768 IdeController.cpp:816
    Free
    16 MsdosFile.cpp:92
    80 DiskDriveAccessExInt13.cpp:93
    512 DiskDriveAccessInt13.cpp:181

    Fat details:

    NTFS details:
    ----------------

    NTFS Global Flags:
    ----------------
    contiguousWrite=1 forceDiskClusterMapping=0
    inhi*****KDSK=1 ignoreBadLog=1 ignoreCHKDSKBit=1
    enable_cache=0 xfrbuflen=32768
    last_attr_type = 0
    loadExact = 0
    ----------------
    ================================================== =====
    NTFS volume 0:
    ----------------
    initialised..............1
    read cached..............N
    Selective caching........N
    flags....................Volume Unknown
    drive....................0x00
    part order...............0
    version..................0x0400
    volsize..................156280256
    blocksize................512
    clusterfactor............8
    clustersize..............4096
    mftrecordsize............1024
    indexrecordsize..........4096
    indexclustperrecord......1
    bootSectorCopyOffset.....156280256
    pagefileSys..............4294967295
    bootIni..................3052
    volumeLabel..............[Rocky2_C]
    sectorsInUse.............64726336
    totalNonCopiedBytes......429916160
    bytesToCopy..............0
    bitmapClusters...........597
    bitmapUsedBytes..........2441880
    estimatedClusters........597
    estimatedUsedBytes.......2441880
    clustersizeShift.........12
    blocksizeShift...........9
    mftrecordsizeShift.......10
    indexrecordsizeShift.....12
    totalRootMftRecs.........102037
    clustermap failover......N
    Boot sector details
    name....................[NTFS ]
    blocksize...............512
    clusterfactor...........8
    reservedSectorsUnused...0
    mediaType...............0xf8
    secPerTrack.............63
    numHeads................255
    hiddenSectors...........63
    volsize_lo..............156280256
    volsize_hi..............0
    mftcluster.(lo).........786432
    mftcluster.(hi).........0
    mftmirrorcluster.(lo)...9767516
    mftmirrorcluster.(hi)...0
    clustersPerMFTRecord....246
    clustersPerIndexBuffer..1

    ---------------------------------------------------
    Cluster Allocation Map
    ---------------------------------------------------
    Start: 19535032 Length: 0 Next: 19535032


    ================================================== =====

    Disk Error Details

    Int13 error: uncorrectable CRC or ECC error on read (0x10)

    Disk Info :
    remote.............0
    drive..............0
    sectors_used.......156280257
    estimated_used.....63886657
    pemax..............1
    Version............760

    # Ord Boot Id Ext First Num Last Used NTFS
    0 0 80 7 No 00000063 156280257 156280320 64726336 Yes

    Disk Info :
    remote.............0
    drive..............0
    sectors_used.......0
    estimated_used.....0
    pemax..............0
    Version............0

    # Ord Boot Id Ext First Num Last Used NTFS

    Drive 128 WDC WD800JB-00CRA1 WD-WCA8E6985764

    Int 13h
    Total Sectors 16450560
    Bytes per Sector 512
    MB 8032
    Cylinders 1024
    Heads 255
    Sectors per Track 63

    Extended Int 13h
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319
    Error Count 1
    Last Error
    Int13 error: uncorrectable CRC or ECC error on read (0x10)


    IDE using PIO
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319
    Cylinders 16383
    Heads 16
    Sectors per Track 63

    IDE using UDMA (Active)
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319
    Cylinders 16383
    Heads 16
    Sectors per Track 63
    Error Count 2
    Last Error
    IDE Controller error:
    Address mark not found
    Error 0x01
    Device/Head 0xe0
    Cylinder High 0x56
    Cylinder Low 0xdc
    Sector Number 0x6e
    Sector Count 0x29
    LBA Sector 5692526


    Drive 129 WDC WD800JB-00ETA0 WD-WCAHL4865804

    Int 13h
    Total Sectors 16450560
    Bytes per Sector 512
    MB 8032
    Cylinders 1024
    Heads 255
    Sectors per Track 63

    Extended Int 13h
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319

    IDE using PIO
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319
    Cylinders 16383
    Heads 16
    Sectors per Track 63

    IDE using UDMA (Active)
    Total Sectors 156301488
    Bytes per Sector 512
    MB 76319
    Cylinders 16383
    Heads 16
    Sectors per Track 63

    Remote Drives
    AsyncIo : 0
    Image Devices

    Key A:
    Path A:
    Desc
    Type Floppy

    Key C:
    Path C:
    Desc [-VPSGHBOOT-]
    Type Disk
    Disk 0
    Offset 124246710

    Key @LFO1:1
    Path 1:1
    Desc [Rocky2_C]
    Type NTFS
    Disk 0
    Offset 63

    Key @LFO2:1
    Path 2:1
    Desc [DRV2_VOL1]
    Type NTFS
    Disk 1
    Offset 63

    Key @CD-R1
    Path @CD-R1
    Desc ATAPI CD-RW 52X24
    Type CD

    Key @CD-R2
    Path @CD-R2
    Desc CREATIVE CD5233E-N
    Type CD


    *********************************
    -- GHOST\GSCRIPT.TXT ----------------------------------------------------------

    [BackupOperation]
    AlreadyProcessedFile = YES
    BeginTimeParam = Fri Mar 26 07:14:57 2004
    CompressionParam = 1
    DestFingerprintParam = aa4596e3-617f-4b2e-8c8b-738d9be77f82
    DestPartitionOffsetParam = 63
    EndTimeParam = Fri Mar 26 07:33:44 2004
    ExecutionStateParam = ExecutionFailed
    FileIdParam = 2028306
    PathParam = \backup.gho
    SourceFingerprintParam = acecc14f-5370-4aff-bfe7-a6fe2e51d245
    UseImageDescriptionParam = YES
    UseLFOParam = YES
    WindowsPathParam = F:\backup.gho

    -- GHOST\ARGS.TXT -------------------------------------------------------------

    -igb -z1 -imgdescfile=\ghost\imgdescp.txt -wizard "-clone,mode=create,src=@GFacecc14f-5370-4aff-bfe7-a6fe2e51d245,dst=@GFaa4596e3-617f-4b2e-8c8b-738d9be77f82:63\backup.gho" -ghwrap
    -- AUTOEXEC.BAT ---------------------------------------------------------------

    @echo off
    SET PATH=C:\GHOST;C:\
    SET PROMPT=To return to Windows, type ghreboot and press Enter.$_$p$g
    SET TZ=GHO+05:00
    if "%CONFIG%" == "WINDOWS" goto WINDOWS
    MOUSE.COM
    CD \GHOST
    GHWRAP.EXE
    goto EOF

    :WINDOWS
    \GHOST\GHREBOOT.EXE

    :EOF
    -- CONFIG.SYS -----------------------------------------------------------------

    [MENU]
    menuitem=GHOST,Run Norton Ghost Dos Operation
    menuitem=WINDOWS,Return to Windows without running Norton Ghost
    menudefault=GHOST,3

    [GHOST]
    LASTDRIVE=Z

    [WINDOWS]

    I am using xp home, thanks for any help.

    Big Will

  2. #2
    Extreme Member! BipolarBill's Avatar
    Join Date
    Oct 2000
    Location
    Norton Noo Joisey
    Posts
    41,528
    Either one of your disks has errors or your RAM is bad.

    You can check the RAM with this:

    www.memtest86.com

    As far as checking the disk goes, I can't make a recommendation until you tell us which Windows version you have.
    MS MCP, MCSE

  3. #3
    Member
    Join Date
    Sep 2001
    Location
    Arlington, VA, US
    Posts
    67
    Make sure you run chkdsk /f in DOS mode to fix any errors that might be in your hd. Also, see if you can boot into safe mode and run a thorough scan of the HD to check for bad sectors.

  4. #4
    Extreme Member! BipolarBill's Avatar
    Join Date
    Oct 2000
    Location
    Norton Noo Joisey
    Posts
    41,528

    Re: Norton Ghost 2003

    Originally posted by Big Will
    I am using xp home, thanks for any help.
    Ah - I see now. It would help if you use proper case when typing. There's a lot of text up there and I was looking for capital letters. I have a real problem with this new informal "MSN chat" writing style...

    CHKDSK is correct. In Windows, use CHKDSK X: /F (where X is the drive).

    In the Recovery Console, it's CHKDSK X: /R
    MS MCP, MCSE

  5. #5
    Member Big Will's Avatar
    Join Date
    Sep 2001
    Location
    Cleveland, Oh.
    Posts
    109
    Thanks Guys,
    I'll try those when I get home.

    Any other suggestions?

  6. #6
    Ultimate Member FijiJohn's Avatar
    Join Date
    Mar 2002
    Location
    Savusavu Fiji
    Posts
    1,197
    It's 99.99% that you either have a corrupt disk or bad RAM as Bill says. You are unlikely to be successful in Ghosting until you fix the problem. Thee is a swtich that can force Ghost ot ignore most disk problems but not all. I just ran into one with a bad MFT table entry and Ghost could not overcome it.
    FijiJohn

  7. #7
    Member Big Will's Avatar
    Join Date
    Sep 2001
    Location
    Cleveland, Oh.
    Posts
    109
    I had some bad sectors on my disk. All is cool now.
    Thanks guys


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •