Micron Motherboard Doesn't Boot

[undecipherable]

Please help! My Micron PTSAM Motherboard won't boot. It seems to POST correctly, but will not boot into the SETUP program. Any ideas?

BIOS Version 1.21 02/17/97

Compatibility Software Copyright (c) 1984-1996 Pheonix Technologies Ltd.
Copyright (c) Diamond Multimedia Systems, Inc.
PhoenixBIOS 4.0 Release 5.12
Copyright 1986-1996 Phoneix Technologies Ltd., All Right Reserved.
Portions Copyright 1994-1997 Micron Electronics, Inc.

Build Time 02/06/98 11:48:01

Micron Electronics, Inc. PTSAM - 03
Nampa, Idaho

CPU = Pentium Pro 333 MHz

0131072K System RAM Passed
0256K Cache SRAM Passed
UMB upper limit segment address: F0D8
System CMOS chesksum bad - run SETUP
2F8h COM address conflict

Entering SETUP....

<freezes>

[Susan]

You might need to clear your BIOS with the jumper on the MB. (Unplug the ATX power from the MB before you change the jumper)

[Strawbs]

Hey! it's probably just too old man. But that Pentium Pro333's got to be worth something, wanna sell it?

[AllGamer]

Welcome to SysOpt!
Susan, and undecipherable

as for the Computer problem

are you able to Boot into a BOOT DISK?

[rlpos]

I was under the impression Pentium Pro 's only were made in 150, 180, and 200 mhz

[omega31]

The Pentium Pro 333mhz is an Intel Overdrive processor.