-
Member
Tyan 9600 Pro causing freezing
C&C General's Locks my PC up.
Cat 3.7 drivers installed.
tried Underclocking card to 380core/450mem.
It's a *****. Direct X 9 stuff works well
Most games OK.
will cat 3.8 fix it or special C&C patch?
I know its the card the overheat siren goes off and edges look a bit **** can't even get to the menu to turn settings down.
@:?~>$£!#
-
Hey man... i have the same prob.
C&C Zero Hour... it locks up after some 5.minutes of playing.
BUT if i play skirmish then it dosen't lock up
oh yeah... my card is ti4200
-
Ohio State r0x0rz!
Re: Tyan 9600 Pro causing freezing
-
Member
C&C Generals is version 1.6
Specs are two 80mm Case fans, Celeron 1.4 with Thermaltake volcano 7, 2x256mb PC133, Abit ST6R motherboard, SB Audigy, 3com 10/100 NIC, 450w dual fan PSU,1x DVD Rom, 1x 52 speed CDRW, 2x 80GB IBM Deskstars in Striped Raid and 1 x 60 GB IBM deskstar for data drive.
System runs cool no problems. Generals was OK with 4200ti in same machine. Re-installed General's makes no difference!
XP Pro all up to date, Direct X 9b and Cat 3.7 drivers.
Turn down acceleration in trouble shooting and it runs but Mouse pointer keeps disappearing and to me thats not acceptable.
Works ok on my P3 1ghz with old 4200ti so it got to be my 9600pro for sure specially with the warning beep whenit hangs.
-
Ohio State r0x0rz!
Originally posted by dazsears
C&C Generals is version 1.6
Specs are two 80mm Case fans, Celeron 1.4 with Thermaltake volcano 7, 2x256mb PC133, Abit ST6R motherboard, SB Audigy, 3com 10/100 NIC, 450w dual fan PSU,1x DVD Rom, 1x 52 speed CDRW, 2x 80GB IBM Deskstars in Striped Raid and 1 x 60 GB IBM deskstar for data drive.
System runs cool no problems. Generals was OK with 4200ti in same machine. Re-installed General's makes no difference!
XP Pro all up to date, Direct X 9b and Cat 3.7 drivers.
Turn down acceleration in trouble shooting and it runs but Mouse pointer keeps disappearing and to me thats not acceptable.
Works ok on my P3 1ghz with old 4200ti so it got to be my 9600pro for sure specially with the warning beep whenit hangs.
That does sound like the card. Is the warrenty expired yet? Can you still RMA? Those are the options that I would look into.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|