Results 1 to 3 of 3

Thread: P111 800 overclocking...

  1. #1
    Member Alan J's Avatar
    Join Date
    Jan 2002
    Location
    Little Neston, Wirral, England UK
    Posts
    38

    P111 800 overclocking...

    Anyone know of a utility to extend the Award Bios of my Chaintech MOBO to include more and smaller steps for the bus speed?

    I've tried one that was on their CD but it was an unfathomable DOS one that hung and had the most unreadable Readme and switches (SMVX.exe, Reatek cpu boost).

    My board (CT 6asa4 type) and CPU (P111, 800) runs well at 103 (824mhz) but fails at 112mhz (895mhz). The utility promised steps between (106,109) and I think these would work.

    Cheers

    Alan J. (UK)

  2. #2
    Member bigblue's Avatar
    Join Date
    Jul 2001
    Location
    Ft. Lupton, Colorado, USA
    Posts
    53
    Don't know of any utilities.

    My PIII 800/100 could only get to 115FSB using Giga-bytes overclocking utility. PIII 800s come in 100 and 133 flavors. Getting more than 920 is a real challenge. They don't overclock too well.

    Good luck on your endeavors...
    2400+ (12x166)
    8RDA Rev 1.1 (3305 BIOS)
    2x256 TwinMos/Windbond PC3200
    AIW 9700 Pro (Cat3.1, MMC8.0)
    Audigy
    SE=15,517
    Game2=163.1 (HiDetail)
    Game4=120.4 (Nature)
    03=5060

  3. #3
    Senior Member uncle_jimbo's Avatar
    Join Date
    Mar 2002
    Location
    Salem, Oregon
    Posts
    562
    Try SoftFSB, though it has been discontinued and is not supported anymore, it may work for you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •